Diy Pillow from Shirt: Upcycle T-shirt into Cozy Cushion
Ever found yourself with an old favorite shirt that's seen better days, but you can't bear to part with it? Or perhaps you're looking to add a personal touch to your living space without breaking the bank? Transforming a beloved shirt into a DIY pillow is not only an eco-friendly and budget-conscious solution, but also a fun and rewarding craft project. Here's a simple, step-by-step guide to creating a unique and stylish pillow using an old shirt.
Before you start, consider the design you want to achieve. For a casual, retro look, use a graphic tee or a band shirt. For a more sophisticated touch, opt for a light-colored, solid shirt. You can also mix and match two shirts for a patchwork effect. The fabric choice also depends on the size of your pillow form. A standard-sized pillow usually requires two large men's or extra-large women's shirts.
Gather Your Materials
First, select your shirt(s), a pillow form that fits your desired pillow size, scissors, needle and thread that match your shirt's fabric, a sewing machine (optional), and any embellishments you wish to add, such as buttons, patches, or appliqués.



Ensure your shirt is clean and free of any wrinkles or stains. It's also a good idea to pre-wash the shirt to prevent shrinkage after you've sewn your pillow together.
Cut the Fabric
Next, lay your shirt flat and decide which parts you want to use. For a simple, plain pillow, you can use the entire front or back panel. For a more creative design, cut out specific phrases, graphics, or shapes that you want to feature on your pillow.



Place the pattern or pillow form on top of the shirt to determine if you need to make the pieces larger to fit around the pillow. Remember to leave a 1-inch seam allowance when cutting your fabric pieces. You will need two identical pieces for the front and back of your pillow, and two identical pieces for the band that will encase the pillow form.
Create the Pillow Pieces
Using your shirt pieces, measure and cut out two rectangles that are 1.5 inches wider and the same height as your pillow form. These will become the sides of your pillow cover. From the remaining fabric, cut out two strips that are 6 inches wide and corresponding to the height of your pillow form. These will become the top and bottom of your pillow cover.
If you've chosen to create a patchwork design or add embellishments, now is the time to add those to your fabric pieces. Ensure that any added elements are securely sewn on before proceeding with the assembly of your pillow cover.






Sew the Pillow Pieces Together
Starting with the top and bottom pieces, fold the fabric along the 6-inch edge and press the seam with an iron. Backstitch along the fold, then trim the seam allowance if desired. Repeat this process for the second piece.
Next, take the side pieces and press the 1.5-inch seam allowance along the width. Backstitch along the fold. At this stage, your pieces should resemble four rectangles with double-folded seams on one side and a single-folded seam on the other.
Assemble the Pillow Cover
Place the top and bottom pieces right sides together, so the seam is along one of the short edges. Line up the top panel piece on top of the bottom panel piece with right sides facing. Stitch around the outer edges of the top and bottom panels, leaving the side edges open.

Now, place these assembled top and bottom pieces right sides together with one of the side pieces. Stitch along the side seam, then repeat with the other side piece.
Create the Band for the Pillow Form
Take the two remaining shirt pieces that you cut out to fit around the pillow form. Place them right sides together and sew along the two shorter edges, leaving the longer edges open.
Turn the fabric tube right side out, and press the seam with an iron. Use this band to encase the pillow form, folding the raw edges inward if necessary to accommodate the size of the pillow form.
Secure the Band
To finish your DIY pillow, insert your pillow form into the envelope-like cavity you've created. Tuck the band around the pillow and secure it in place with a simple stitch around the opening. Ensure the band is snug but not too tight, as this could cause your pillow to lose its shape.
Finally, trim any excess threads and admire your unique, upcycled creation!
Your DIY pillow made from a shirt not only adds a personal touch to your space but also serves as a testament to your creativity and resourcefulness. Plus, it's an excellent way to respi



