DIY Truck Gun Rack: Easy & Secure
Tired of rummaging through your truck for your firearms, risking damage or accidents? A DIY gun rack for your truck is the perfect solution. Not only will it keep your guns secure and organized, but it'll also enhance your truck's aesthetics and functionality. Let's dive into how to create one, step by step.
First things first, consider your truck's size and the type of firearms you own. The gun rack should accommodate your guns securely, preventing any movement during transit. Also, ensure it's easy to reach and doesn't obstruct your driving or passenger's comfort.
Choosing the Right Material
The most commonly used materials for DIY gun racks are wood and metal. Each has its pros and cons. Wood is sturdy, durable, and provides a classic aesthetic. However, it's prone to rot and warp over time. Metal, on the other hand, is strong, durable, and can withstand harsh weather conditions, but it can also dent or scratch your guns if not finished properly.



For this guide, let's focus on a simple and sturdy wooden DIY gun rack. It'll provide a classic look and blend well with most truck interiors.
Tools Needed
You'll need a few basic tools to create your DIY gun rack. These include:



- Tape measure
- Pencil
- Circular saw
- Drill (with various bits)
- Screwdriver
- Wood glue
- Sanding paper (80- and 150-grit)
- Stainless steel screws (1-1/4 and 1-1/2 inch)
- Wood stain (optional)
Design and Planning
Start by deciding on the dimensions of your gun rack. Measure the length and width of your gun barrels and consider the size of your truck's bed. Factor in a few inches of clearance for easy access and gun safety.
Sketch out your design on graph paper. A simple, vertical, multi-tiered design will work best for most trucks. This design allows you to maximize space and accommodate different gun sizes. Ensure the top tier is at a safe height for easy access, and the lowest tier is high enough to avoid dirt and debris.
Building the Gun Rack
Once you've planned your design, it's time to gather your materials. You'll need enough 2x4 lumber to match your design's measurements. For a simple, vertical, multi-tiered design, you'll need:






- 4 pieces of 2x4 lumber (8 feet long)
- 1 sheet of 1/4-inch plywood (4x8 feet)
Cutting the Lumber
Using your circular saw, cut the 2x4 lumber according to your design. You'll need two vertical pieces (uprights) and several horizontal pieces (shelves). The uprights should be cut to the height of your gun rack plus an extra 3 inches for the base. The shelves should be cut to the width of your truck bed and the desired spacing between tiers.
The plywood will serve as the base and backrest. Cut it to match the length and width of your truck's bed.
Assembly
Start by attaching the uprights to the plywood base using 1-1/4 inch screws. Ensure they're positioned at the edges to provide maximum support and stability.

Next, install the shelves. Start from the bottom and work your way up. Pre-drill your holes to prevent the wood from cracking. Apply wood glue to the edges before screwing in place for added strength.
Securing the Gun Rack
To keep the gun rack secure, attach it to your truck's bed using rated load straps or brackets. This will prevent it from shifting during transit.
Finishing Touches
For a smooth, durable finish, sand the gun rack with 80-grit sandpaper, then switch to 150-grit for a smoother finish. Wipe off any dust, then apply your wood stain (if desired) following the manufacturer's instructions.
Once the stain is dry, your DIY gun rack is ready for use. Load up your guns, secure them with gun locks, and you're ready to hit the road.
Remember, safety is paramount when dealing with firearms. Always store and transport your guns responsibly, following local laws and regulations. Enjoy your organized, secure, and stylish DIY gun rack in your truck!





