No Dig DIY Fence
Building a fence can be a challenging task, especially when it involves digging. However, with a little ingenuity and the right materials, it's possible to construct a durable and attractive fence without breaking a sweat or disturbing your lawn. In this guide, we'll explore the advantages of a no-dig fence and walk you through two popular DIY options: post hole digger and base plate fences.
Eliminating the need for digging not only saves you time and effort but also helps preserve the integrity of your lawn. It's an eco-friendly approach that spares your plants and prevents potential pipe damage. Moreover, no-dig fences are perfect for rented properties where digging isn't permitted, or for properties with rocky or uneven terrain.
Post Hole Digger Fence
Despite its name, this fence style requires minimal digging. You'll only need to dig a few inches to create a solid foundation for your posts. Let's dive into the process.



The post hole digger fence is best suited for wooden picket or privacy fences. It requires a post hole digger, concrete, and gravel for each post.
Preparing the Site
First, mark out your fence line using stakes and string. This will help you visualize the fence and ensure it's plumb and level. Next, determine the locations for your posts. For a typical 6-foot fence, place posts every 6 to 8 feet.



Using the post hole digger, dig a hole about 12 inches deep and 8 inches wide at each post location. This should be deep enough to provide a stable base for your fence. Fill the hole with a few inches of gravel to improve drainage.
Setting the Posts
Cut your posts to the desired height, adding an extra 36 inches for the footing. Stand your post in the hole, ensuring it's plumb. Use a level to check its alignment, and adjust as needed.
Mix your concrete according to the manufacturer's instructions and pour it into the hole around the post, filling it to the top. Allow the concrete to cure for at least 48 hours before proceeding with the fence installation.






Base Plate Fence
The base plate fence is a no-dig option that sits on top of the ground, making it an excellent choice for rentals or areas with rocky soil. It's also a speedy solution that requires minimal tools.
Base plate fences can be made from various materials, including wood, vinyl, or metal. They use posts embedded in concrete footings for stability and base plates to support the fence panels.
Materials and Tools
For this project, you'll need fence panels, base plates, posts, concrete, gravel, a post hole digger, and basic tools like a tape measure, level, and saw.

Measure your fence line and determine the number of panels needed. Also, calculate the number of posts required, spacing them every 6 to 8 feet, or according to the panel size.
Installing the Posts
Dig a hole identical to the post hole digger fence method, fill the bottom with gravel, and set your post in the hole. Ensure it's plumb and allow it to extend a few inches above the fence panel height.
Mix and pour concrete around the post, just like in the post hole digger fence method. After the concrete cures, attach the base plates to the posts using screws or bolts. The base plate should sit flush with the ground, providing a stable base for your fence panels.
With either fence style, attach your fence panels to the posts, securing them with screws or nails. Ensure the fence is level and plumb as you install each panel.
When you've finished installing your fence, take a moment to admire your handiwork. A no-dig fence is a swift and eco-friendly solution that enhances your outdoor space while minimizing disruption to your lawn. Happy building!




