Easy DIY Brick Landscape Edging Ideas
Adding a distinctive touch to your landscape can significantly enhance its curb appeal, and creating DIY brick landscape edging is an excellent and budget-friendly way to achieve this. This rustic, classic design element not only defines the boundaries of your lawn or garden but also adds a charming, timeless aesthetic that complements any home style.
Before you embark on this rewarding project, it's crucial to understand that patience and precision are key. With the right tools, a touch of creativity, and these step-by-step guidelines, you'll soon be the proud creator of stunning brick edging that enhances your outdoor space and increases your home's value.
Planning Your Brick Landscape Edging
Before you start, consider the scale and design of your edging. Measuring the perimeter of your landscaping area and factoring in curves, corners, and other complexities will help you determine how many bricks you'll need. FYI, a standard brick is about 8" long, 4" deep, and 3" high, so plan accordingly.



Decide on the edging width – the wider the edging, the more bricks you'll use, and the more pronounced the pattern will be. Remember that wider edging can also require more frequent cutting of bricks to achieve a smooth, closed edge.
Choosing the Right Bricks
To achieve the look you want, choose bricks that complement your home's exterior. Common types include clinker, rough-faced, and bullnose. Clinker bricks have a smooth, burnished surface that's ideal for paths ordriveways, while rough-faced bricks offer a rustic, non-slip texture perfect for slopes and other high-traffic areas. Bullnose bricks have a curved edge for a softer, more elegant aesthetic.



Opting for used or salvaged bricks can add a unique, vintage charm to your landscape, but keep in mind that they may be more fragile and require extra care during installation. If using reclaimed bricks, ensure they're free of severe cracks or crumbling that could compromise their stability.
Gathering Necessary Tools
Before you dive intolaying your bricks, make sure you have the right tools for the job. These include:
- Masonry trowel
- Tape measure
- Level
- Rubber mallet
- Brick chisel and hammer (for cutting bricks)
- Shovel and wheelbarrow (for transporting materials)
- Landscape fabric (to inhibit weed growth)
- Garden hose or spray bottle (for keeping bricks damp)
Depending on the size of your project and the complexity of the design, you might also need: a






- 得 Globe string line
- Pavers' sand
- acero or concrete sealer
- Brick bonding adhesive or thin-set mortar
Installing Your DIY Brick Landscape Edging
Now that you've planned and prepared, it's time to transform your vision into reality. Begin by laying out a rough pattern using your bricks, moving them around until you're satisfied with the spacing, design, and flow.
Once you're happy with the layout, follow these steps to install your bricks:

Establishing a Base
Mark the edging line using spray paint, then dig a trench along this line, about 3" to 4" deep and the same width as your chosen edging (add 1" if you're using mortar between bricks). If you're Installing the edging on a slope, the trench should be deeper at the bottom to accommodate the taller bricks at that end.
Pour 1" to 2" of sand or pavers' sand into the trench, and use a rake or trowel to create a smooth, level base. This layer helps ensure stability and good drainage. Lightly dampen the sand before moving on to the next step.
Laying the First Course
Starting from a corner or straight edge, lay your first brick on the sand base. Use a level to ensure it's plumb and flush with the surrounding ground. Tap it gently with a rubber mallet if necessary.
Continue laying bricks along the line, using a globe string line to maintain consistent spacing and alignment. Apply brick bonding adhesive or thin-set mortar to the sand base before setting each brick to help secure them in place and inhibit weeds from growing between them. If you're working on a steep slope, you might need to cut some bricks to accommodate the hill's contour.
Constructing the Second Course and Beyond
For the second course, you'll probably need to start with a half-brick or cut brick to maintain a staggered or running bond pattern, which adds strength and visual appeal to your edging. Lay the bricks on top of the first course, offsetting them by half a brick's width, and continue this pattern for each subsequent course.
As you build upward, ensure each course is level and aligned with the one below it. You can use a spirit level, straight edge, or a combination of both to maintain vertical and horizontal accuracy. Regularly step back to assess your progress and make adjustments as needed.
Finishing Up and Maintaining Your Edging
Once you've reached your desired height, carefully cut any final bricks to size using a brick chisel and hammer, maintaining the staggered pattern. Backfill behind the edging with soil, compacting it gently to anchor the bricks in place.
Apply a sealant to protect your bricks from moisture and stains, and to enhance their durability. Allow the sealer to dry according to the manufacturer's instructions before exposing the edging to foot traffic or water.
With proper care and maintenance, your DIY brick landscape edging will serve as a stunning, long-lasting feature that enhances your home's exterior for years to come. Keep in mind that periodic cleaning and touching up with sealant will help preserve the edging's beauty and functionality.
Embrace the satisfaction of creating a personalized, timeless addition to your landscaping, and let your new DIY brick landscape edging be a testament to your creativity and skills. Happy building, and enjoy the process of transforming your outdoor space into a unique reflection of your style!



