Diy Bench Shoe Rack
Are you tired of cluttered shoe racks and slippery hallway floors? It's time to declutter and maximize your space with a DIY bench shoe rack. Not only does this practical and stylish project keep your footwear organized, but it also provides additional seating. Let's dive into this beginner-friendly guide and explore the steps to build your perfect shoe rack-bench hybrid.
Before we start, let's assess your skills and tool requirements. This project is suitable for DIY enthusiasts with basic woodworking skills. You'll need a miter saw, drill, screwdriver, sandpaper, proceedings, and some basic safety gear. As for materials, you'll need 2x4 lumber, 1x4 lumber, pocket hole screws, wood glue, and sanding sealer.
Planning and Design
First, decide on the perfect size and design for your shoe rack-bench. Consider the dimensions that suit your entryway and the number of shoes you want to store. Our project features a 60" long bench with 8 shoe cubbies, but feel free to adjust the size to fit your needs.



Sketch your design or use our example to draft your cut list. This will ensure you have all the necessary materials before heading to the hardware store. The following measurements are based on our 60" long, 8 cubby design:
- 2x4s: (4) @ 20" long
- 2x4s: (4) @ 17" long
- 1x4s: (10) @ 18.5" long
- 1x4s: (4) @ 17.5" long
- 1x4s: (4) @ 6" long
Cutting and Preparing your Lumber
Using your miter saw, cut the lumber according to your cut list. Ensure you're working on a stable surface and always wear safety gear when using power tools. After cutting, sand any rough edges with 120-grit sandpaper to prevent splinters and create a smooth surface for staining or painting.



Additionally, drill pocket holes into both ends of the 17" 2x4s and the 17.5" 1x4s. These pocket holes will help reinforce the bench's structure when assembling.
Assembling the Bench Frame
Start by attaching four of the 20" 2x4s together using pocket hole screws to create the outer frame of your bench. Ensure the frame is square by measuring 20" from end to end on both sides.
Next, attach the 17" 2x4s inside the frame using wood glue and pocket hole screws. These will serve as the supports for your shoe cubbies. After attaching the supports, renforce the corners with wood glue and pocket hole screws.






Creating the Shoe Cubbies
Begin constructing the shoe cubbies by attaching two of the 18.5" 1x4s together using wood glue and pocket hole screws. Repeat this step until you have four identical cubby boxes.
Attach one of the 6" 1x4s to the bottom of each cubby using wood glue and nails to create the base. This will provide a sturdy foundation for your shoes.
Attaching the Shoe Cubbies
Apply wood glue to the 17" 2x4 supports inside the bench frame, then attach the four shoe cubbies using pocket hole screws. Ensure the cubbies are evenly spaced and centered within the bench frame.

Lastly, attach the remaining 18.5" 1x4s to the top of the bench frame using wood glue and brad nails, creating the bench's backrest and beautifully finishing your DIY shoe rack-bench.
Final Touches and Staining/Painting
Sand the entire bench lightly with 220-grit sandpaper to remove any rough spots or excess glue. Wipe the bench clean with a damp cloth to prepare it for staining or painting.
Apply your chosen stain or paint, allowing it to dry according to the manufacturer's instructions. If desired, add a sanding sealer to protect and enhance the finish of your new DIY bench shoe rack.
Step back and admire your handiwork! Your custom-built bench shoe rack not only keeps your entryway organized but also adds a touch of personality to your home. Invite friends and family to try out your new seating while simultaneously enjoying a clutter-free shoe space. Happy crafting, and happy organizing!





