dewalt dw872 14-inch multi-cutter saw

DeWalt DW872 14-Inch Multi-Cutter Saw: The Ultimate Metal Cutting Powerhouse

By Nicole Johnson
AD

The DeWalt DW872 14-inch multi-cutter saw is a cold-cut metal saw built for fabricators, welders, and serious DIYers who are tired of abrasive chop saws throwing sparks and leaving rough edges. Instead of grinding through steel with friction, the DW872 uses a carbide-tipped blade spinning at a controlled 1,300 RPM to slice through metal with surprising speed and accuracy.

If you have ever spent ten minutes cleaning up a cut with a grinder, the appeal of this machine becomes obvious. The DeWalt DW872 is designed to deliver burr-free, cool-to-the-touch cuts in steel, stainless steel, aluminum, and other materials, making it a favorite for welding prep, fabrication, and maintenance work.

What Makes the DeWalt DW872 a Standout Multi-Cutter Saw

The DW872 sits in a useful middle ground between portable band saws, abrasive chop saws, and large industrial cold saws. It is heavy enough to feel stable in a shop yet compact enough to move around a jobsite, and its 15 amp motor gives it the torque needed for continuous metal cutting without bogging down in common stock sizes.

AD
DeWalt Unveils Five New Carpentry Tools for 2026
DeWalt Unveils Five New Carpentry Tools for 2026
DeWalt DW872 Multi-Cutter Saw Review
DeWalt DW872 Multi-Cutter Saw Review
Dewalt power tools
Dewalt power tools

Unlike a traditional abrasive saw, this DeWalt multi-cutter saw is engineered around a carbide blade and a slower blade speed. That combination produces chips rather than sparks, minimizes heat discoloration, and often leaves a cut that is ready to weld or paint after a quick deburring pass.

Motor, Blade, and Cutting Capacity

The heart of the DW872 is its 15 amp, 1,300 RPM motor. That speed is intentionally low for a 14-inch saw because carbide teeth need a controlled cutting speed to survive in metal. The saw accepts a 14-inch carbide-tipped blade with a 1-inch arbor, and it includes a spindle lock to make blade changes safer and more straightforward.

a cordless power tool laying on the ground
a cordless power tool laying on the ground
Mr. Yellow's Content - Power Tool Forum
Mr. Yellow's Content - Power Tool Forum
Dewalt is Launching 2 New Oscillating Multi-Tools
Dewalt is Launching 2 New Oscillating Multi-Tools

Capacity is generous for a saw in this class. At 90 degrees, the DW872 can handle roughly 5-3/16 inches of round or square material. As you move the miter fence toward 45 degrees, capacity drops to about 4-1/2 inches, which still covers most angle iron, square tubing, pipe, and channel used in everyday fabrication. The quick-release vise and adjustable fence help hold material securely and repeatably.

Cold-Cut Technology and Cut Quality

Cold-cut technology is the DW872's defining feature. Instead of relying on abrasion to burn through steel, the carbide teeth mill away material at a controlled rate. The result is a cut that stays relatively cool, produces metallic chips, and avoids the hardened, discolored edge that abrasive saws often leave behind.

AD

For welders and fabricators, that means less grinding, less heat distortion, and tighter fits. Cutting square tube for a gate, angle iron for a trailer repair, or pipe for a railing becomes faster because the saw leaves a clean face that is closer to finished. The trade-off is that the blade is more expensive than an abrasive wheel, and the saw must be used with a steady, deliberate feed rather than forced through the material.

a yellow and black chainsaw sitting on the ground
a yellow and black chainsaw sitting on the ground
Best Dewalt saw for beginners
Best Dewalt saw for beginners
The Best Dewalt Band Jigsaw on the Market
The Best Dewalt Band Jigsaw on the Market
two dewwell tools are shown in this image
two dewwell tools are shown in this image
Valley Fir & Redwood: Lumber, Millwork, and Tools in Columbus, Georgia
Valley Fir & Redwood: Lumber, Millwork, and Tools in Columbus, Georgia
Dewalt
Dewalt

Performance, Safety, and Practical Use in the Shop

In daily use, the DW872 feels like a professional tool. The cast base and vise assembly give it stability, while the downstroke action is smooth and predictable. It is not a lightweight portable saw, but its handle and overall footprint make it manageable for one person to move between a bench, a truck, and a job site.

The saw is at its best when it is set up correctly. A secure workpiece, the right blade for the material, and a controlled cutting motion matter more on a cold-cut saw than on an abrasive chop saw. Once you develop that rhythm, the DW872 can produce repeatable cuts quickly and with far less cleanup than most metalworkers expect.

AD

Safety Features and Proper Operation

DeWalt includes several safety features that make the DW872 easier to control. The lower blade guard retracts as the saw head is lowered, the vise keeps the material from spinning or shifting, and the trigger requires deliberate engagement. The spindle lock is a helpful addition during blade changes, but the saw should always be unplugged before servicing the blade or clearing chips.

two dew tools are sitting on top of a table next to some wood planks
two dew tools are sitting on top of a table next to some wood planks
Dewalt DW872 Metal Saw 2
Dewalt DW872 Metal Saw 2
a close up of a metal object on a wooden floor
a close up of a metal object on a wooden floor
DeWalt Sub-Compact Circular Saw – Tools In Action – Power Tool Reviews
DeWalt Sub-Compact Circular Saw – Tools In Action – Power Tool Reviews

Proper operation starts with personal protective equipment. Safety glasses or a face shield, hearing protection, and gloves are sensible when cutting metal. The workpiece should be clamped tightly in the vise, and the blade should reach full speed before it touches the material. Let the teeth do the work, avoid side loading, and never reach into the cutting path to clear debris while the blade is moving.

Blade Selection, Maintenance, and Longevity

The DW872's performance depends heavily on the blade. A quality carbide-tipped 14-inch blade designed for ferrous metal cutting is the standard choice for steel, stainless steel, and similar materials. Tooth count and blade geometry affect cut speed and finish, so it is worth matching the blade to the job rather than using one blade for every material and thickness.

AD

Maintenance is relatively simple but important. Check the blade for chipped or missing teeth, keep the vise and fence clean, and inspect the arbor and blade mounting hardware for wear. Using a cutting lubricant or wax designed for cold-cut saws can extend blade life and improve finish, especially in stainless steel. Replace a dull blade before it starts overheating the workpiece, because forcing a worn blade is hard on both the motor and the cut quality.

Who Should Buy the DeWalt DW872?

The DW872 is aimed at users who cut metal often enough to care about speed, accuracy, and clean results. A hobbyist building a single gate may not need a cold-cut saw, but a welding shop, fabrication business, maintenance team, or serious garage fabricator will quickly appreciate the difference between sparks and chips.

It is also a strong choice for anyone who cuts a lot of tubing, angle iron, pipe, or flat bar and wants to reduce grinding time. The saw is not the cheapest option upfront, and the blades cost more than abrasive wheels, but the total cost can make sense when you factor in faster finishing, less rework, and cleaner cuts.

Ideal Users and Real-World Applications

Welders and fabricators are the most natural users for the DW872. It shines when cutting square tubing for frames, angle iron for brackets, pipe for railings, and flat stock for plates and supports. Because the cut stays cool, measurements remain stable and welded joints fit together with less persuasion from a grinder.

Maintenance departments and contractors also benefit. Cutting threaded rod, conduit, strut channel, and repair stock becomes cleaner and more predictable than with an abrasive saw. The saw can handle aluminum and other non-ferrous materials with an appropriate blade, but it is important to select the right blade and cutting parameters for each material rather than assuming one setup covers everything.

Pros, Cons, and Buying Considerations

The main advantages of the DeWalt DW872 are clean cuts, minimal sparks, low heat, and good capacity for a 14-inch saw. It is robustly built, has a proven motor, and uses a common blade size that is easy to source. For shop-based fabrication, those benefits often justify the price and the slightly slower feed rate compared with an abrasive chop saw.

The drawbacks are also worth understanding. The DW872 is heavy, the blades are expensive, and it is not the right tool for hardened steel or very thick solid stock. It also requires more attention to clamping and blade condition than an abrasive saw. If your work is mostly rough cuts in scrap metal, a cheaper abrasive saw may be sufficient. If your work demands accuracy and weld-ready edges, the DW872 makes far more sense.

For metalworkers who want a cleaner, more controlled alternative to sparks and grit, the DeWalt DW872 14-inch multi-cutter saw remains a compelling option. Pair it with the right carbide blade, keep the vise tight, and it can turn everyday metal cutting into one of the more precise and satisfying parts of a fabrication project.

AD