Despard Switches: The Ultimate Guide to Stylish Wall Lighting Control
Despard switches are a unique breed of electrical switch that many homeowners encounter only when they open a wall plate in an older home. Instead of the familiar wide toggle switch, a Despard switch uses a compact, narrow body and a small toggle lever, allowing several switches to fit into a single electrical box. This modular design was once a clever solution for controlling multiple lights from one location without installing a large, multi-gang box.
Because Despard switches are no longer as common as standard toggle switches, they can be confusing to identify, wire, and replace. Whether you are restoring a mid-century home, troubleshooting a flickering light, or planning an electrical upgrade, understanding how Despard switches work will help you make safer and more informed decisions.
What Are Despard Switches?
A Despard switch is a type of modular electrical switch characterized by its small, rectangular body and narrow toggle. The design originated in the early 20th century and became especially popular in homes built between the 1940s and 1960s. The name "Despard" is often used generically, much like "Kleenex" for tissues, to describe this specific switch style regardless of the manufacturer.
These switches are typically rated for 15 amps and 120 volts, and they are available in single-pole, three-way, and four-way configurations. What sets them apart is the mounting system: instead of each switch occupying a full gang in a wall box, multiple Despard switches can be mounted side by side on a single frame and covered by a plate with several small rectangular openings.
Origins and Design
The Despard switch was originally manufactured by Pass & Seymour, and its compact form factor solved a common problem in residential wiring. Standard switches are roughly 1.5 inches wide, so a two-gang box is needed for two switches. Despard switches are much narrower, allowing two, three, or even four switches to fit within a single-gang box. This made them ideal for bathrooms, hallways, and kitchens where space was tight.
The switch mechanism itself is a small block with screw terminals on the sides or back. The toggle is short and stubby, and the mounting strap has a distinct rectangular cutout. Over time, other manufacturers produced compatible switches, but the basic Despard form factor remained consistent. Today, original Despard switches are considered vintage, and new replacements are often sold as specialty items.
How They Differ from Standard Switches
A standard toggle switch has a wide metal yoke that screws directly to the electrical box. A Despard switch, by contrast, is narrower and often mounts to a separate metal frame or bracket. The cover plate then attaches to that frame, holding the switches in place. This means you cannot simply swap a Despard switch with a standard toggle switch without changing the mounting hardware and cover plate.
Wiring terminals also differ. Many Despard switches use side screws, but some older models have push-in connectors or unusual terminal layouts. The wires may be cloth-insulated or aluminum in very old installations, which adds another layer of complexity. For these reasons, replacement should always begin with identifying the exact switch type and wire configuration.
Wiring, Replacement, and Safety
Working with any electrical switch requires caution, but Despard switches present unique challenges. The boxes are often shallow and crowded, and the wiring may not follow modern color-coding conventions. Before touching any wires, turn off the power at the circuit breaker and verify that the circuit is dead with a non-contact voltage tester or multimeter.
Replacement Despard switches are available, but they are not typically stocked at big-box hardware stores. You may need to order them from a specialty supplier. If you cannot find an exact match, you might need to install a new electrical box, rewire the circuit, or use an adapter plate that allows standard switches to fit a Despard cover plate.
Identifying Despard Wiring
To identify Despard wiring, remove the cover plate and examine the switches. You will likely see a metal frame holding two or more narrow switches. Count the wires connected to each switch: a single-pole switch has two terminals, a three-way switch has three, and a four-way switch has four. Take clear photos before disconnecting anything, and label each wire with tape.
In older homes, you may find no ground wire, or the ground may be connected to the metal box. Use a multimeter to confirm which wire is the line (hot) and which is the load. If the wiring is cloth-covered, brittle, or aluminum, stop and consult a licensed electrician. Aluminum wiring in particular requires special connectors and techniques to prevent overheating.
Replacing a Despard Switch
To replace a Despard switch, first turn off the power and remove the cover plate. Unscrew the switch from the mounting frame and gently pull it out of the box. Disconnect the wires, noting their positions. Connect the new switch using the same terminals, tighten the screws securely, and mount the switch back onto the frame. Restore power and test the switch before reinstalling the cover plate.
If the new switch does not fit the existing frame, you may need a different mounting bracket or a new cover plate. Some modern Despard-style switches are designed as direct replacements, while others require slight modifications. If you are uncomfortable working with electrical wiring, hiring a qualified electrician is the safest choice. They can also tell you whether the existing box and wiring are up to current code.
Sourcing Parts and Modern Alternatives
Finding Despard switches can be a scavenger hunt. Specialty retailers, online marketplaces, and electrical supply houses that cater to historic homes are your best bets. Some suppliers sell new-old-stock switches, while others offer modern reproductions that look and function like the originals. Always check the amperage rating, terminal type, and whether the switch is UL-listed or equivalent.
If you cannot find Despard switches, or if you want to upgrade to modern lighting controls, you have several alternatives. You can replace the entire box with a standard multi-gang box and install standard switches. You can also use adapter plates that convert Despard openings to accept standard toggle or decorator switches. Smart switches and dimmers are another option, but they often require a neutral wire and deeper box space.
Where to Buy Despard Switches
Specialty online stores such as Kyle Switch Plates, Classic Accents, and Rejuvenation often carry Despard switches and matching cover plates. eBay and Etsy can be good sources for vintage switches, but quality varies. Local architectural salvage yards and electrical supply houses may also have old stock. When buying vintage switches, inspect the terminals for corrosion and test the switch with a multimeter before installation.
For new replacements, look for brands that explicitly state "Despard" or "Despard-style" compatibility. Read customer reviews and return policies. If you are unsure whether a switch will fit, order one sample first. Some suppliers offer wiring diagrams and technical support, which can be invaluable for a successful installation.
Modern Alternatives and Upgrades
Modern alternatives range from simple to sophisticated. A basic option is to install a standard toggle switch in a new single-gang box and patch the old Despard opening. This works well if you are remodeling and do not need to preserve the historic look. For a more seamless upgrade, adapter plates can mount standard switches or decorator switches into a Despard-style cover plate, though the fit may not be perfect.
Smart switches and dimmers offer convenience like remote control, scheduling, and voice commands. However, they typically require a neutral wire, which may not be present in older Despard installations. You may also need a deeper electrical box to accommodate the larger smart switch body. A licensed electrician can assess your wiring and recommend the best path forward, whether you want to preserve the vintage charm or modernize the entire lighting system.
If your home still has Despard switches, they are more than a quirky detail from a bygone era. They are a reminder of how electrical design has evolved, and they can still work safely when maintained properly. Before you tackle a replacement, gather the right parts, take your time, and respect the limits of your comfort and expertise. A little patience—and a good electrician when needed—will keep your lighting reliable and your home safe for years to come.