delta dp350 drill press

Delta DP350 Drill Press Review: Specs, Features & Best Buying Guide

By Thomas Thomas
AD

The Delta DP350 drill press has earned a loyal following among woodworkers, metalworkers, and DIY enthusiasts who need a reliable benchtop drilling machine without dedicating floor space to a full-size floor model. Its cast iron table, compact column, and variable-speed spindle make it a practical choice for garages, small workshops, and maintenance rooms. While newer drill presses may offer digital readouts or laser guides, the DP350 remains appealing because it is straightforward, serviceable, and capable of clean, accurate holes when properly tuned.

If you are shopping for a used Delta DP350 drill press, you are likely comparing it against modern benchtop models from Wen, Jet, and Grizzly. The DP350's reputation rests on its solid build and simple mechanical controls. This guide covers what makes it stand out, how to set it up, and what to inspect before buying one. It will also help you decide whether this older Delta model still makes sense for your shop.

What Makes the Delta DP350 Drill Press a Shop Favorite

The DP350 is a 12-inch benchtop drill press, which means it can handle the center of a 12-inch-diameter workpiece in theory, though real-world capacity depends on the table position and bit length. Its head and table are typically made of cast iron, giving it more mass and vibration resistance than lightweight budget models. That mass matters when you are drilling with Forstner bits, hole saws, or large twist bits, because chatter and deflection ruin hole quality quickly.

AD
Delta DP350 Benchtop Drill Press - FineWoodworking
Delta DP350 Benchtop Drill Press - FineWoodworking
a machine that is sitting on top of a blue tableclothed surface in front of a brick wall
a machine that is sitting on top of a blue tableclothed surface in front of a brick wall
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 11-120 Drill Press
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 11-120 Drill Press

Delta designed this model around variable speed, so you can adjust RPM to suit the material and bit diameter. Instead of moving a belt to a different pulley groove for every job, you can dial in a speed range that keeps the cutting edge cool and the hole clean. The exact speed range varies by production era, but many DP350 units are listed around 500 to 3,100 RPM. That range covers slow speeds for metal and plastics and faster speeds for wood and small bits.

Compact Bench Top Footprint

The biggest advantage of the Delta DP350 drill press is its footprint. It sits on a workbench or stand and uses vertical space rather than floor space. In a garage shop, that means you can keep your table saw, band saw, and assembly bench without tripping over a floor-standing drill press. The base is heavy enough to feel stable, but the machine is still manageable for one person to move with proper lifting technique.

a machine that is sitting on top of a workbench in a shop with tools
a machine that is sitting on top of a workbench in a shop with tools
Drill Presses for sale | eBay
Drill Presses for sale | eBay
a machine that is sitting on top of a table
a machine that is sitting on top of a table

Because it is a benchtop machine, stability depends on the surface beneath it. Bolting the base to a sturdy bench or dedicated stand reduces vibration and improves drilling accuracy. If you cannot bolt it down, add a plywood mounting plate and clamp or bolt that plate to the bench. A stable DP350 feels much more precise than one that rocks or walks during heavy cuts.

Spindle, Chuck, and Speed Control

The DP350 typically uses a 5/8-inch chuck, which accepts a wide range of drill bits, including reduced-shank bits for large holes. Spindle travel is often around 3-1/4 inches, enough for most furniture, cabinet, and metal fabrication tasks. The quill and return spring should move smoothly; if the quill feels gritty or the chuck has visible runout, the machine may need new bearings or a chuck replacement.

AD

Speed control is the feature that separates the DP350 from basic five-speed benchtop presses. Use slower speeds for metal, especially when drilling steel with twist bits and cutting fluid. Increase speed for wood, but keep it moderate when using large Forstner bits or hole saws. The right speed, combined with light feed pressure, produces cleaner holes and longer bit life.

The 12 Best Drill Presses (2023 Update) - Full Guide
The 12 Best Drill Presses (2023 Update) - Full Guide
a machine that is sitting on top of a wooden table in a room with other items
a machine that is sitting on top of a wooden table in a room with other items
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Delta 17\
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Delta 17\
Delta Homecraft drill press
Delta Homecraft drill press
a machine that is sitting on top of a metal table in the middle of a room
a machine that is sitting on top of a metal table in the middle of a room
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 17 in drill press
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 17 in drill press

Setup, Maintenance, and Buying Advice for the Delta DP350

Setting up a Delta DP350 drill press starts with assembling the column, base, table, and head if the machine was disassembled. Check that the column is clean and free of rust before sliding the table and head into place. Tighten the column lock and head lock securely, then verify that the table is square to the spindle. A machinist’s square placed between the table and a straight drill rod will reveal any tilt that needs correction.

Routine maintenance keeps the DP350 accurate. Lubricate the quill and table rack with a light machine oil, check belt tension and condition, and inspect the wiring for cracked insulation. Clean sawdust and metal chips from the table and base regularly, especially around the column. If the return spring loses tension, adjust it according to the manual or a reliable service guide. A few minutes of care each month prevents most frustrating drilling problems.

AD

Alignment and Table Adjustments

Table alignment is critical on any drill press. Start by checking the table tilt scale and locking mechanism. Loosen the tilt lock, set the table perpendicular to the spindle, and tighten the lock firmly. Use a square against the table and a chucked drill rod, not against the chuck body, because the chuck body may not be perfectly true. Once square, mark the setting so you can return to it quickly after angled drilling.

Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Drill Press
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Drill Press
the delta driller is on top of a stand with a machine attached to it
the delta driller is on top of a stand with a machine attached to it
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 17-210 17\
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - 17-210 17\
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Drill Press 17 inch
Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - Drill Press 17 inch

The table height adjustment should move smoothly through the rack and pinion. If it binds, clean the rack and column, then apply a thin coat of oil or dry lubricant. When drilling long workpieces, lower the table to a comfortable height and support the far end of the board. Clamp the workpiece or use a drill press vise; hand-holding a workpiece is one of the most common causes of injury and ruined holes.

Common Issues, Upgrades, and Used Buying

Used Delta DP350 drill presses often show a few predictable issues. Check for quill play by extending the quill and trying to wiggle it side to side. Some play is normal, but excessive movement means worn bearings or a worn quill. Inspect the chuck jaws for rust or damage, test the variable-speed mechanism through its full range, and listen for grinding or rattling. Also check the motor under load if possible, since a tired motor may bog down in hardwood or steel.

AD

Upgrades can make the DP350 more pleasant to use. A quality aftermarket chuck, a link belt, a mobile base or sturdy stand, and a drill press vise are practical improvements. LED work lights and a simple fence also help. A well-cared-for Delta DP350 drill press with smooth quill action, a true-running chuck, and no cracks in the castings is still a capable machine for home shops. If you find one at a fair price, bring it home, tune it up, and put it to work on your next project.

AD