Datacomm Electronics 50-6623: 2-Gang Recessed Cable Plate with Power
The Datacomm Electronics 50-6623 is a recessed media box built to tame the tangle of cables behind a wall-mounted television, network hub, or home theater cabinet. Instead of letting power cords and HDMI runs bulge out from the drywall, this two-gang solution creates a clean, recessed cavity where connections can sit nearly flush with the wall. For installers and DIYers alike, it is a practical way to combine low-voltage data lines with line-voltage power in a single, organized location.
Searching for the Datacomm 50-6623 usually means you are planning a professional-looking AV or structured wiring project. The part is often specified when a standard wall plate is too shallow, when a TV mount needs extra room for plugs, or when multiple cables need to enter the wall without exposed clutter. Its white finish and recessed design make it especially popular in living rooms, bedrooms, offices, and commercial conference spaces.
What Is the Datacomm Electronics 50-6623?
In simple terms, the Datacomm Electronics 50-6623 is a two-gang recessed media box designed for in-wall power and low-voltage connections. It provides a deeper, recessed opening than a traditional mud ring or faceplate, allowing bulky HDMI connectors, coax fittings, and power adapters to sit behind the plane of the wall. This extra depth reduces strain on cables and helps a flat-panel TV or furniture piece rest closer to the wall.
The box is part of Datacomm's broader line of structured wiring and cable management products. It is typically used with a duplex receptacle for power and keystone jacks or bulk cable pass-throughs for data, voice, video, and audio. Because it separates power and low-voltage sections, it helps installers maintain a safer, more code-conscious layout while keeping everything accessible from one service point.
Key Features and Build Quality
The most important feature of the Datacomm 50-6623 is its recessed, two-gang configuration. That layout gives you room for a power outlet on one side and low-voltage connections on the other, or for a combination of keystone ports, HDMI pass-throughs, and coaxial connectors. The white, paintable trim blends into most walls, and the mounting design is intended to hold the box securely once drywall is cut and cables are routed.
Build quality matters in a recessed media box because it must support repeated cable plugging, minor adjustments, and the weight of connected cords. The 50-6623 is generally constructed from durable materials that resist cracking and deformation during installation. Its design also helps protect cable bends, which is important for HDMI and Ethernet performance, since sharp kinks can degrade signal quality or damage connectors over time.
What Comes in the Box and Compatibility
Depending on the retailer and kit version, the Datacomm Electronics 50-6623 may include the recessed media box, mounting hardware, and sometimes a wall plate or low-voltage insert. Some listings sell the box alone, while others bundle it with a duplex outlet, keystone jacks, or a power module. Before ordering, it is wise to confirm the exact contents so you can purchase any missing receptacles, jacks, or faceplates separately.
The 50-6623 is compatible with many standard low-voltage accessories, including keystone jacks for Ethernet, coaxial F-connectors, RCA modules, HDMI inserts, and speaker wire terminals. It is also designed to work with common residential electrical boxes and wiring methods, though local codes always govern how line-voltage and low-voltage cables must be separated. If you are unsure about your specific setup, check the manufacturer's instructions and consult a licensed electrician for the power side.
Why Choose the Datacomm 50-6623 for TV and Network Installations?
The main reason to choose the Datacomm 50-6623 is cable management. Wall-mounted TVs look best when no cables dangle below them, and a recessed media box lets you route power, HDMI, coax, and Ethernet through the wall to a single concealed location. That makes the installation look intentional rather than improvised, whether you are mounting a TV in a family room or setting up a digital sign in a lobby.
A second reason is flexibility. Because the box is recessed, it can accommodate power plugs and cable connectors that would otherwise protrude and push against the TV or mount. It also makes future upgrades easier: if you later add a streaming device, soundbar, or network switch, you can often fish another cable to the same box instead of cutting a new hole. This future-ready approach saves time and preserves the finished wall.
Installation Scenarios and Best Practices
The Datacomm 50-6623 is commonly installed behind a wall-mounted TV, above a fireplace, inside a media cabinet, or at a desk where multiple devices need power and data. In existing construction, the installer cuts a two-gang opening, checks for studs and obstructions, fishes cables through the wall, and secures the box with the included mounting wings or bracket. In new construction, it can be positioned before drywall goes up, making cable routing even cleaner.
Best practices include mapping every cable before cutting, keeping power and low-voltage runs separated as required, and leaving a service loop for future terminations. Use a stud finder and a low-voltage bracket or remodel box as appropriate, and avoid over-tightening screws that could crack drywall. After terminating connections, test every port with a cable tester and verify that the TV or device can be plugged in without bending the cords sharply.
Comparison with Standard Wall Plates and Other Media Boxes
A standard wall plate is inexpensive and simple, but it does not create depth. Plugs and cable ends stick out, which can interfere with slim TV mounts and make cable management harder. The Datacomm 50-6623 solves that by recessing the connection point, so the wall stays flatter and the cables can bend gradually inside the cavity. This is a meaningful upgrade for anyone who cares about a clean finish.
Compared with single-gang recessed boxes, the 50-6623 offers more room for combined power and data. Compared with larger structured wiring enclosures, it is more compact and better suited to a single TV location rather than a whole-home distribution panel. That makes it a focused solution: not a replacement for a full network cabinet, but an excellent choice for a dedicated AV or workstation wall.
If your project calls for a tidier wall behind a television, monitor, or media setup, the Datacomm Electronics 50-6623 is worth adding to your shortlist. Confirm the kit contents, plan your cable routes before cutting, and pair the box with quality keystone jacks and a properly installed receptacle. A little planning at the rough-in stage will pay off every time you look at a wall free of dangling cords and messy adapters.