Step-by-Step Crivit Shade Sail Instructions
Discover the beauty and functionality of Crivit shade sails with our comprehensive installation guide. If you're looking to enhance your outdoor space with these stylish and practical sun shelters, you've come to the right place. We'll guide you through every step of the process, from measuring and planning to tensioning and securing. Let's get started!
Before you begin, ensure you've gathered all the necessary tools and materials - Crivit shade sail kit, measuring tape, drill, screwdriver, lag screws or teak plugs, eyebolts, sail track, and saw (if needed). Safety is paramount, so always wear appropriate Personal Protective Equipment (PPE).
Preparation and Planning
Proper preparation and planning are key to a successful shade sail installation. Start by determining the size and shape of your shade sail, ensuring it's compatible with your chosen Crivit kit. Then, measure the area where you'll install the sails, noting any obstructions or uneven surfaces.



Identify installation points - typically, you'll need three or four for each sail. Mark these points with a pencil or marker, ensuring they form the desired shape when connected. Now, let's delve into the installation process.
Installing the Mounting Brackets
With your installation points marked, it's time to install the mounting brackets. Drill pilot holes at each point, ensuring they're level and the correct depth. If installing on a wall or fascia, use the provided lag screws. For wooden surfaces, use teak plugs and screws.



Position the brackets over the pilot holes, then secure them using the lag screws or screws. Ensure they're tightly fastened and level. If necessary, use a saw to trim any excess bracket material.
Securing the Shade Sail to the Brackets
With the brackets installed, it's time to attach the shade sail. Position the sail over the brackets, ensuring it's taut and evenly distributed. Attach the sail to each bracket using the provided screws or eyebolts, pulling it tight as you go.
Be sure to maintain an even tension across the sail, adjusting as necessary. Once all brackets are secured, double-check that the sail is evenly tensioned and has no wrinkles or creases.






Installing Additional Support Structures
Depending on the size and complexity of your shade sail, you may need to install additional support structures, such as posts or a sail track system. Posts are typically required for larger sails or those with more complex shapes, while a sail track system can provide a sleek, low-profile solution for attaching sails to walls or buildings.
Installing Support Posts
If installing posts, dig post holes at the desired locations, ensuring they're deep enough to accommodate the post length and provide a stable base. Brace the posts as you fill the holes with concrete, allowing it to cure according to the manufacturer's instructions.
Once the concrete has cured, attach the mounting brackets to the posts using lag screws or bolts. Then, follow the same process as above to secure the shade sail to the brackets.

Installing a Sail Track System
If using a sail track system, start by measuring and marking the installation points along the wall or fascia. Drill pilot holes at these points, ensuring they're level and the correct depth.
Position the sail track over the pilot holes, ensuring it's level and backed with the provided support bracket. Secure the track using the provided screws, driving them through the bracket and into the wall or fascia. Repeat this process for all track sections.
With your shade sails installed, you can now enjoy your outdoor space with added sunshine and protection. Regularly inspect your shade sails, tightening any loose fittings and ensuring they remain taut and secure. If you ever have any questions or need assistance, don't hesitate to reach out to our customer support team. Happy sailing!




