Craftsman Professional Planer Review: Features, Performance & Buying Guide
If you have ever stared at a pile of rough-sawn lumber and wished it would magically become flat, consistent stock, a Craftsman Professional planer is one of the most practical tools you can add to a home shop. These benchtop thickness planers earned a loyal following for bringing serious milling capability into garages, basements, and small workshops without demanding a forklift or a three-phase electrical service.
This guide looks at what makes the Craftsman Professional planer useful, how to set it up for clean cuts, and how to avoid the frustrations that give thickness planers a bad reputation. Whether you already own one, are considering a used model, or simply want to understand where it fits in a woodworking workflow, the details below will help you get more from the machine.
Understanding the Craftsman Professional Planer
The Craftsman Professional planer is generally a 12-1/2-inch benchtop thickness planer, with models such as the 351.217170 and similar vintage units representing the line well. It uses a universal motor, a two-knife cutterhead, and a pair of folding infeed and outfeed tables to support boards as they pass through. Its job is straightforward: take rough or glued-up material and reduce it to a consistent thickness.
It is important to understand what this planer is not. A thickness planer does not flatten a twisted or cupped board in the way a jointer does. It makes the top surface parallel to whatever face is riding on the bed. For best results, you still need to flatten one face and square one edge first, then use the Craftsman Professional planer to bring the opposite face to final thickness.
Key Features and Specifications
Depending on the model and production year, commonly cited specs for a Craftsman Professional planer include a 12-1/2-inch maximum width, roughly 6-inch thickness capacity, a 15-amp motor, two reversible high-speed steel knives, a maximum depth of cut around 3/32 inch, and a feed rate near 26 feet per minute. Many units also include a dust port, a hand crank for depth adjustment, a depth-of-cut scale, and a thermal overload reset button.
The machine’s cast aluminum base, steel columns, and folding tables make it portable enough to store under a bench or roll into a corner. Features like a cutterhead lock, rubber or steel feed rollers, and adjustable table height help with repeatability. Parts availability can be hit or miss for older models, so checking the model plate and confirming knife dimensions before buying replacement parts is always wise.
What It Does Well in a Small Shop
In a small shop, the Craftsman Professional planer shines when milling rough lumber, cleaning up reclaimed wood after nails and staples are removed, flattening glued panels, and dimensioning cabinet parts, face frames, cutting boards, and shop jigs. It is compact, relatively affordable on the used market, and capable of producing smooth, consistent stock when it is properly tuned.
Its limitations are equally worth knowing. The 12-1/2-inch width restricts you to narrower boards unless you glue up panels after planing. The stock two-knife cutterhead can tear out figured hardwood, and the universal motor is loud. Snipe can appear if the tables are misaligned or technique is careless. When buying used, inspect the bed for rust, check the columns for play, look for nicked knives, and run a test board if possible.
Getting the Best Performance from Your Planer
Performance from a Craftsman Professional planer depends far less on horsepower than on alignment, sharpness, and feed technique. Once the bed is clean, the tables are coplanar, and the knives are set to the same height, the machine can produce glue-ready surfaces in many species. Skip those steps, and even a powerful planer will leave ridges, snipe, and tearout.
Dust collection, feed direction, and depth of cut also matter more than most owners expect. A planer cannot reproduce flatness that is not already present in the bed and table setup, so it pays to check the machine with a good straightedge before blaming the lumber. Long boards need support, and hard, figured, or resinous woods demand lighter passes and sharper edges.
Setup, Calibration, and Blade Care
Start by unplugging the planer. Check the bed for flatness with a straightedge and clean off any pitch, rust, or debris. Adjust the infeed and outfeed tables so they are flush and coplanar with the bed, using a straightedge across the entire surface. Set the knives with a dial indicator or a reliable magnetic knife-setting jig so every knife reaches the same height. Inspect the drive belt, feed rollers, and chain, then lubricate the columns and threaded rods according to the manual. A light coat of paste wax on the bed and tables reduces friction and helps boards feed smoothly.
Blade care is the single biggest factor in cut quality. Rotate or replace knives as soon as they feel dull, and never feed lumber that may contain nails, staples, or grit. Clean pitch from the knives with a proper blade cleaner, and keep spare knives on hand. For the 351.217170 and similar models, aftermarket replacement knives are often available, but a helical cutterhead conversion should be researched carefully because not every Craftsman planer supports one. A helical head can reduce noise and tearout, but the cost may exceed the value of a used machine.
Techniques to Reduce Snipe and Improve Finish
Snipe happens when the board transitions from the infeed roller to the cutterhead and then to the outfeed roller, causing the ends to be cut slightly deeper than the middle. You can reduce it by feeding boards end-to-end so the next board supports the trailing end, using sacrificial backer boards, lifting the board slightly as it enters and exits, keeping the tables perfectly level, taking lighter passes, locking the cutterhead when available, and maintaining the feed rollers. A little experimentation with scrap stock will reveal the sweet spot for your machine.
For a better finish, take final passes at 1/64 to 1/32 inch. Feed with the grain whenever possible, and avoid running end grain through unless it is well supported. Figured maple, cherry, and other tearout-prone species benefit from very light cuts and freshly sharpened knives. Keep the dust collection connected, because chips left in the cutterhead can be pressed into the surface. Always run a test piece before committing an expensive board to the planer.
Before you fire up your planer, take a few minutes to check the tables, knives, and dust hose. A well-tuned Craftsman Professional planer can turn a pile of rough boards into square, consistent stock, and that quiet satisfaction is what keeps woodworkers coming back to the shop. If you are shopping used, bring a straightedge, a test board, and patience; if you already own one, treat it to fresh knives and a proper tune-up. Your next project will show the difference.