craftsman 10 table saw

Craftsman 10 Table Saw Review: Is This 10-Inch Saw Worth It?

By Ashley Miller
AD

If you have spent any time in a garage workshop, you have probably seen one: a Craftsman 10 table saw with a cast-iron top, a faded gray or blue cabinet, and a motor hanging off the back. For generations of woodworkers, this saw was the first real step up from a circular saw and a straightedge. It could rip plywood, crosscut framing lumber, and cut dadoes with the right accessories, all without the price tag of a cabinet saw.

Today, the Craftsman 10-inch table saw remains a staple of the used market. Some are belt-driven contractor saws from the 1970s and 1980s, while others are later direct-drive models built for lighter duty. Knowing which version you are looking at, and how to tune it properly, can turn a $100 yard-sale find into a reliable centerpiece for a home shop.

Why the Craftsman 10-Inch Table Saw Still Matters

The 10-inch blade size is the sweet spot for home woodworking. It offers enough depth of cut for thick stock and enough rim speed for clean rips, yet it runs on standard 120-volt power in most cases. Craftsman sold these saws by the thousands through Sears catalogs and retail stores, which means parts, manuals, and advice are still surprisingly easy to find.

AD
Reader Question: Jet vs. Craftsman 10-Inch Table Saw for Home Workshop Use
Reader Question: Jet vs. Craftsman 10-Inch Table Saw for Home Workshop Use
a machine that is sitting in the middle of a room with other machines behind it
a machine that is sitting in the middle of a room with other machines behind it
Craftsman 10
Craftsman 10

Many vintage models feature a cast-iron table and extension wings, which provide stability that modern benchtop saws often lack. The open-stand contractor design is also easy to move, repair, and modify. For a hobbyist who wants cast-iron flatness without spending thousands, a well-sorted Craftsman 10 table saw can be a practical bargain.

A Legacy of Accessible Woodworking

Craftsman built its reputation on tools that ordinary people could afford. The 10-inch table saw was central to that mission. Instead of forcing buyers into industrial machinery, Sears offered a saw that could be financed, delivered, and serviced locally. That accessibility helped millions of homeowners build decks, cabinets, and furniture in their own garages.

Save On Select Tools at Lowes.com
Save On Select Tools at Lowes.com
NEW TABLE for Craftsman 10“ RADIAL ARM SAW”
NEW TABLE for Craftsman 10“ RADIAL ARM SAW”
Craftsman 10
Craftsman 10

The saws were not perfect. Fences could be fussy, guards were sometimes awkward, and the motors were not immune to abuse. Still, the basic architecture was sound. A solid trunnion, a sturdy arbor, and a flat top are the ingredients that matter, and many Craftsman models got those right. That is why so many are still in service today.

Key Models and Manufacturing Eras

You will see model numbers beginning with prefixes such as 113, 315, and others depending on the year and manufacturer. The 113 series is often associated with Emerson Electric and includes many beloved belt-drive contractor saws. Later 315 models came from a different manufacturing era and may use direct-drive motors or lighter components. The model plate on the back of the saw is your best guide.

AD

Belt-drive saws typically have a motor mounted behind the saw, connected by a belt to the arbor. They run quieter and can be repaired more easily. Direct-drive saws integrate the motor and arbor, which saves space but makes motor replacement harder. When shopping used, confirm which design you are considering before you load it into your truck.

Mercado Libre
Mercado Libre
Old Craftsman 10
Old Craftsman 10
a table saw is sitting on top of a green work bench with tools attached to it
a table saw is sitting on top of a green work bench with tools attached to it
ad eBay | $629.99 | Craftsman 315.228390 10" Table Saw 120V 1Ph 45° Bevel 3600RPM | Business & Indus
ad eBay | $629.99 | Craftsman 315.228390 10" Table Saw 120V 1Ph 45° Bevel 3600RPM | Business & Indus
a table sawing machine sitting on top of a metal stand with tools in it
a table sawing machine sitting on top of a metal stand with tools in it
a table saw is on top of a tool box
a table saw is on top of a tool box

Buying, Setting Up, and Tuning a Used Craftsman 10 Table Saw

A used Craftsman 10 table saw can be a great value, but only if you inspect it carefully. Check the cast-iron top for cracks, deep pitting, or warping. Surface rust is usually manageable, but a top that rocks on a straightedge is a problem. Also inspect the trunnions, elevation gears, and tilt mechanism for missing teeth or excessive play.

Once the saw is home, resist the urge to make a test cut immediately. Unplug it, clean out years of sawdust, and lubricate the moving parts. Then align the blade, calibrate the fence, and check the motor and belt. A few hours of setup can make the difference between a frustrating machine and one that cuts accurately for years.

AD

Blade Alignment and Fence Calibration

Blade alignment starts with the miter slot. Raise the blade to its highest position and mark one tooth with a marker. Measure from that tooth to the left miter slot at the front of the blade, then rotate the blade and measure the same tooth at the back. The difference should be nearly zero. If it is not, adjust the trunnion bolts until the blade is parallel to the slot.

Craftsman Evolve 10\
Craftsman Evolve 10\
DELTA Contractor saws 10-in 15-Amp 120-Volt Corded Contractor Table Saw with Fixed Stand Lowes.com
DELTA Contractor saws 10-in 15-Amp 120-Volt Corded Contractor Table Saw with Fixed Stand Lowes.com

Next, calibrate the fence. Clamp it down and measure from the fence face to the miter slot at both the front and back. Adjust the fence clamp or rail until it is parallel. A fence that drifts or flexes will cause kickback and burned edges. If your original Craftsman fence is beyond adjustment, an aftermarket T-square fence is one of the best upgrades you can make.

Motor, Belt, and Arbor Maintenance

On belt-drive models, inspect the belt for cracks, glazing, and proper tension. A link belt can reduce vibration and improve cut quality, especially on older saws with worn pulleys. Clean the motor vents, check the wiring for brittle insulation, and make sure the motor mount is secure. A motor that runs hot or smells burnt may need new bearings or a replacement.

AD

The arbor assembly also deserves attention. Spin the blade by hand and listen for grinding or ticking. Grab the blade and check for side-to-side play. Worn arbor bearings can ruin cut accuracy and should be replaced before they damage the shaft. Lubricate the trunnion gears with dry lubricant, not heavy grease, so sawdust does not turn into a sticky paste.

Safety, Blades, and Smart Upgrades for Your Craftsman 10 Table Saw

Table saw safety is not optional, especially on older saws that may lack modern riving knives and blade guards. Always use push sticks, featherboards, and eye protection. Keep your hands away from the blade path, and never make freehand cuts. If your saw has a functional guard, use it whenever the cut allows.

Blade choice matters just as much as technique. A sharp, appropriate blade reduces kickback and improves the quality of every cut. Upgrades such as a better fence, a zero-clearance insert, and an outfeed table can also make an old Craftsman feel much more modern. You do not need to rebuild the entire saw to get better results.

Choosing the Right Blade for a Craftsman 10 Table Saw

Most Craftsman 10-inch saws use a 5/8-inch arbor, which is the standard for 10-inch blades. If your saw has a 1.5-horsepower motor or less, a thin-kerf blade is usually the best choice. It removes less material, so the motor works less hard and the blade stalls less often in thick hardwood.

For ripping, choose a 24-tooth ripping blade with a flat-top grind. For general crosscutting and cabinetry, a 40-tooth combination blade is a good compromise. If you cut a lot of plywood or melamine, a 60-tooth or 80-tooth crosscut blade will leave cleaner edges. Dado stacks are also possible on many models, but check your arbor length and manual for the maximum width.

Upgrades That Transform the Saw

The first upgrade to consider is a quality fence. A Biesemeyer-style T-square fence, a Vega, or an Incra fence can turn a cranky old Craftsman into a precise ripping machine. Add a mobile base if floor space is tight, and build an outfeed table that supports long boards as they leave the blade. These changes improve both safety and accuracy.

Other worthwhile upgrades include a paddle switch for emergency shutoff, a zero-clearance throat plate, and a magnetic featherboard. For dust control, an under-table dust port and a blade guard with a dust hose can keep the shop cleaner. If you own a belt-drive model, a link belt and machined pulleys can smooth out vibration noticeably. With these additions, a vintage Craftsman 10 table saw can compete with many modern contractor saws.

A Craftsman 10 table saw is more than a nostalgic relic. It is a capable platform that rewards careful setup, sharp blades, and a few thoughtful upgrades. If you find one with a flat top, a healthy motor, and a straight fence, you can build furniture, cabinets, and jigs for years to come. Keep an eye on local listings and estate sales, bring a straightedge and a square, and get ready to make sawdust with a machine that has already proven its worth.

AD