CR1130 Battery: Specs, Replacements, and Where to Buy
When a tiny watch, key fob, or medical thermometer starts acting sluggish, the culprit is often a dead CR1130 battery. This small but dependable 3V lithium coin cell powers many low-drain devices that need steady voltage for months or even years. If you have ever squinted at a battery compartment and wondered whether a CR1130 is the right fit, you are not alone.
Coin cells look alike, but they are not interchangeable. A CR1130 has specific dimensions, chemistry, and voltage that must match your device. Understanding what makes this battery different helps you replace it correctly, avoid damage, and keep your electronics running longer.
What Is a CR1130 Battery?
The CR1130 battery is a lithium manganese dioxide button cell with a nominal voltage of 3 volts. Its name follows a standard code: “CR” indicates lithium chemistry, while “1130” refers to its size. The battery measures approximately 11.6 millimeters in diameter and 3.0 millimeters in thickness, making it slightly smaller than the more common CR2032.
With a typical capacity around 40 to 45 mAh, the CR1130 is designed for low-power, long-term use. It delivers a stable discharge curve, which means the voltage stays fairly consistent until the cell nears the end of its life. That makes it ideal for memory backup, timekeeping, and small remote controls where sudden voltage drops would cause problems.
CR1130 Specifications and Chemistry
At its core, the CR1130 uses lithium manganese dioxide chemistry. This gives it a fresh open-circuit voltage of about 3.0 to 3.3 volts, a nominal 3.0 volts, and a cutoff around 2.0 volts. Depending on the manufacturer, the operating temperature range often falls between -30°C and +60°C, though extreme heat or cold can shorten service life.
Unlike alkaline or silver oxide button cells, the CR1130 is a primary battery, meaning it is not rechargeable. Attempting to charge it can cause leakage, rupture, or fire. Its low self-discharge rate and shelf life of roughly 5 to 10 years make it a reliable backup power source for devices that sit unused for long periods.
Common Devices and Applications
You will find CR1130 batteries in a range of compact electronics. They are commonly used in wristwatches, calculators, digital calendars, small remote controls, car key fobs, garage door openers, and some medical devices such as thermometers and glucose meters. They also appear in toys, laser pointers, and tiny LED accessories.
Because the CR1130 has modest capacity, it is not suitable for high-drain devices like cameras with flashes or motorized toys. If a device eats through a CR1130 quickly, the problem may be a fault in the device rather than the battery. In those cases, checking for corrosion, a stuck button, or a weak contact can save you from replacing the battery again too soon.
CR1130 Battery Compatibility and Replacement Guide
Replacing a CR1130 seems simple, but compatibility involves more than fitting the slot. The replacement must match the physical size, voltage, and chemistry. A battery that is too thick may not let the compartment close, while a battery with the wrong voltage can prevent the device from working or damage its circuitry.
If your device manual specifies a CR1130, choose a fresh 3V lithium CR1130 or a direct equivalent. Do not assume that any 11.6 mm coin cell will work. Alkaline and silver oxide cells with similar dimensions often provide only 1.5 volts, which is half the required voltage for many CR1130 applications.
Cross-References and Equivalent Models
Several manufacturers use their own part numbers for the same CR1130 size and chemistry. Common cross-references include DL1130, ECR1130, KCR1130, L1130, and simply 1130. Brands such as Duracell, Energizer, Maxell, Panasonic, Renata, Sony, Varta, and Murata produce cells that can serve as replacements when they are labeled as CR1130 or an exact equivalent.
Do not confuse the CR1130 with the LR1130 or SR1130. The LR1130 is an alkaline 1.5V button cell, and the SR1130 is a silver oxide 1.55V cell. They may share similar dimensions, but their voltage is very different. Using a 1.5V cell in a device that requires a 3V CR1130 will usually leave the device underpowered and nonfunctional.
Installation, Testing, and Safety
Before installing a CR1130, note the polarity markings in the battery compartment. The positive terminal, usually marked with a plus sign and the battery model, must face the correct direction. Use clean, dry hands or non-metal tweezers, and avoid touching both flat surfaces at once, since skin oils and moisture can create a slight discharge path.
If a device stops working, test the old CR1130 with a multimeter. A fresh cell often reads near 3.0 volts or slightly higher with no load, but a reading below 2.7 volts usually means it is time for replacement. Also inspect the compartment for corrosion or residue, and clean it gently with a cotton swab and a small amount of isopropyl alcohol if needed.
Safety matters with any lithium coin cell. Never recharge, puncture, crush, or expose a CR1130 to fire or high heat. Keep new and used batteries away from children and pets, because swallowed coin cells can cause severe chemical burns within hours. If a battery is swallowed, seek emergency medical attention immediately.
For disposal, check local regulations for lithium battery recycling. Many communities require coin cells to be taken to a recycling center or battery drop-off point rather than thrown in the trash. Taping the terminals with clear tape before storage or disposal can reduce the risk of short circuits and sparks.
Before you snap that new CR1130 battery into place, take a moment to confirm the model number, voltage, and polarity. A careful match keeps your watch ticking, your remote responsive, and your small electronics out of the repair drawer. When you stock spares, choose reputable brands and store them in a cool, dry place so the next replacement is just as reliable as the first.