Covering Wallpaper: Best Styles, Ideas & Easy Installation Tips
Covering wallpaper is one of the most transformative projects you can tackle in a home, whether you are refreshing a tired rental kitchen or breathing new life into a Victorian terrace. The term itself covers a lot of ground: it can mean applying a fresh layer of paper over an existing one, painting directly onto wallpaper, or using a liner to bridge the gap between damaged plaster and your dream pattern. Each route has its own rules, risks, and rewards, and choosing the wrong one can turn a weekend project into a month-long renovation.
Understanding the substrate you are working with is the single most important step before you buy a single roll. Old paste, peeling seams, and moisture trapped behind vinyl can all sabotage a flawless finish, no matter how expensive the wallpaper is. This guide walks through the practical methods, the materials that actually work, and the mistakes that catch even experienced decorators off guard.
Preparing Walls Before You Cover Wallpaper
Preparation is where covering wallpaper succeeds or fails, and it begins long before you mix any adhesive. You need to assess whether the existing wallpaper is firmly bonded, whether the wall behind it is dry, and whether the surface is flat enough to accept a new layer without telegraphing every bump. Skipping this assessment is the most common reason homeowners end up stripping everything back to bare plaster in frustration.
A good rule of thumb is to test adhesion in several spots with a palette knife or your fingernail. If the paper lifts easily at the seams or around light switches, the whole wall is probably compromised. If it resists and tears rather than peels, you likely have a solid enough base to work over with the right primer and lining paper.
Testing Adhesion and Moisture Levels
Start by pressing a damp sponge against a small section of the wallpaper and waiting a few minutes. If the paper bubbles or slides, the original paste is reactivating, which means any new covering will do the same thing within weeks. You should also check for damp patches, especially on external walls and around windows, because trapping moisture behind fresh paper encourages mould and delamination.
A cheap moisture meter takes the guesswork out of this step. Readings above roughly 15 to 20 percent in masonry suggest the wall needs to dry out or be treated with a damp-proof course before any decorative covering goes on. If the wall is dry and the paper is stuck fast, you can move forward with confidence.
Smoothing, Filling, and Sealing the Surface
Once you know the paper is stable, fill any gouges, dents, or flaking edges with a fine surface filler, then sand flush with 120-grit paper. Wipe away the dust with a damp cloth and let everything dry completely. This step matters more than most people realise, because even a 2mm ridge will show through thin wallpaper as a visible shadow line.
Next, apply a specialised wallpaper primer or a diluted PVA sealer. This does two jobs: it locks down any remaining loose paste and creates a uniform surface that stops the old pattern from bleeding through. Glossy or vinyl-coated papers in particular need a good primer, otherwise the new adhesive simply cannot grip.
Methods for Covering Wallpaper Successfully
There are three realistic approaches to covering wallpaper, and each suits a different situation. You can paper directly over the old layer, you can line the wall first for a smoother result, or you can paint over the wallpaper entirely. The right choice depends on how textured the old paper is, how much time you have, and how long you want the finish to last.
Whichever method you pick, always work in a well-ventilated room and protect floors and skirting with drop sheets. Adhesive drips are far easier to prevent than to remove, and paste that dries on woodwork can be a nightmare to clean off without damaging the finish.
Papering Directly Over Existing Wallpaper
Direct covering works best when the old wallpaper is a smooth, tightly bonded paper rather than a thick embossed vinyl. Use a heavy-duty ready-mixed adhesive and a medium-nap roller to get an even coat across both the wall and the back of the new paper. Press the paper into place with a smoothing brush, working from the centre outward to push out air bubbles.
Be aware that the new paper's seams must not line up with the old seams, or the joint will fail. Offset your drops by at least half a width, and overlap the edges slightly before trimming with a sharp blade. This technique adds weight to the wall, so avoid stacking more than two layers or you risk the whole lot peeling under its own mass.
Using Lining Paper as a Bridge Layer
Lining paper is the decorator's secret weapon for covering wallpaper, because it evens out minor imperfections and gives the top layer a clean, neutral background. Apply a 1000 to 1400 grade lining paper horizontally across the wall, overlapping the edges by about 5mm and trimming through the overlap for an invisible joint.
Once the lining paper is dry, you have a smooth, paintable surface that accepts virtually any wallpaper or emulsion. This method is especially useful over textured or embossed papers, since the lining paper bridges the high points and prevents the old texture from ghosting through. It costs a little extra time and money but pays off in a dramatically more professional result.
Painting Over Wallpaper Versus Re-Papering
If the wallpaper is structurally sound but cosmetically dated, painting can be a faster and more budget-friendly alternative to hanging new paper. The catch is that not all wallpapers accept paint well. Vinyl and washable papers resist emulsion, while textured papers soak up paint unevenly and can look patchy after the first coat.
Re-papering, on the other hand, gives you a wider choice of patterns and finishes, and it can hide more sins than paint ever will. The decision usually comes down to how much texture you are willing to live with and how much prep time you can spare, because both routes demand careful surface work.
When Painting Over Wallpaper Works Best
Painting works well on plain, untextured wallpaper that is firmly adhered and free from vinyl coating. Apply an oil-based or shellac primer first to seal the surface and stop the old pattern from showing through, then finish with two coats of quality emulsion. The result is a durable, low-sheen finish that can last for years in low-traffic rooms.
Steer clear of painting over embossed or heavily textured papers unless you actually want that texture amplified by the paint. A light sanding between coats helps smooth the surface, but aggressive sanding can tear the paper and create fuzzy patches that no amount of paint will hide.
Removing Wallpaper When Covering Is Not Viable
Sometimes the honest answer is to strip everything back. If the existing paper is loose, mouldy, or made of vinyl that traps moisture, covering it will only postpone the problem. Score the paper with a wallpaper perforator, apply a stripping solution, and let it soak for fifteen minutes before scraping with a wide blade.
Once the walls are bare, wash off residual paste with warm water and a sponge, then let the plaster dry for at least 48 hours. This is also the moment to repair cracks and skim any uneven areas. Starting fresh is more work upfront, but it gives you a clean, reliable base that will hold a new covering for years.
Choosing Materials and Adhesives for the Job
The materials you choose determine whether your covering job lasts five years or fifteen. Adhesive is the most overlooked component: a cheap paste that dries brittle will crack and release the paper, while a properly specified adhesive flexes with the wall through seasonal movement. Match the adhesive to the weight of the paper and the porosity of the surface.
Primers, sealers, and smoothing tools all play supporting roles, but they are not optional extras. A quality smoothing brush, a sharp trimming knife, and a seam roller will save you hours of frustration and give you edges that look professionally hung.
Adhesive Types and Their Best Uses
Ready-mixed adhesives suit most standard and heavy-weight papers and are convenient for small to medium rooms. Powdered adhesives, mixed on site, offer better value on large jobs and let you adjust the consistency for porous or non-porous surfaces. For vinyl and specialist papers, always use the manufacturer's recommended adhesive to avoid chemical incompatibility.
Border and overlap adhesives are worth keeping on hand for edges and repairs. A small tub lasts for years and lets you fix a lifting seam without re-pasting an entire drop, which is a lifesaver in humid rooms like bathrooms and kitchens.
Tools That Make Covering Easier
A good pasting table, a seam roller, and a long-bladed trimming knife form the core toolkit. Add a spirit level for marking vertical guides, a plumb line for tall walls, and a soft smoothing brush to chase out air pockets. Disposable gloves protect your hands from adhesive, which can dry out skin quickly.
For lining paper and heavy coverings, a wallpaper smoothing brush with stiff bristles works better than a plastic squeegee, which can tear damp paper. Keep a bucket of clean water and a sponge nearby to wipe away paste before it sets on skirting boards and architraves.
Common Mistakes and How to Avoid Them
Most failures when covering wallpaper trace back to rushing the preparation or using the wrong adhesive. Bubbles, lifting seams, and pattern misalignment are nearly always preventable with a bit of patience and the right technique. Knowing the pitfalls in advance lets you sidestep them rather than repair them later.
Another frequent error is ignoring the room's environment. Wallpaper needs stable temperature and humidity while it dries, so avoid hanging in a cold, damp room or directly next to a radiator. Give the paper 48 hours to acclimatise to the room before you start, and keep windows closed during drying to prevent premature shrinkage.
Preventing Bubbles and Lifting Seams
Bubbles usually mean too much adhesive or trapped air. Work the paper firmly with a smoothing brush from the centre outward, and never stretch the paper as you hang it. If a bubble appears after drying, slice it with a sharp blade, inject a little adhesive, and press it flat with a seam roller.
Lifting seams often result from insufficient paste at the edges or from hanging over a glossy surface without primer. Pay extra attention to the edges, applying a thin bead of adhesive with a small brush, and roll every seam firmly once the paper has been in place for a few minutes.
Matching Patterns and Managing Waste
Pattern repeat is the hidden cost in any wallpaper project. A large repeat can waste up to 30 percent of each roll, so always buy an extra roll or two from the same batch to allow for matching and future repairs. Check the batch numbers on every roll before you leave the shop.
Cut your drops with the pattern aligned before you paste anything, laying them out on the floor in sequence. This dry-run approach reveals mismatches early and lets you plan around windows and doors without wasting expensive paper.
Long-Term Care for Covered Walls
Once the paper is up, a little maintenance keeps it looking sharp for years. Dust walls gently with a soft brush or a vacuum fitted with a brush attachment, and wipe washable papers with a barely damp sponge. Avoid soaking the surface, since moisture can penetrate seams and loosen the adhesive.
Keep an eye on high-traffic areas like hallways and stairwells, where scuffs and hand marks appear first. Touch-up paint or a small offcut of wallpaper can handle minor damage, and addressing small issues early prevents them from spreading into larger repairs.
Cleaning and Repairing Wallpaper
For washable and vinyl papers, a mild detergent solution and a soft cloth handle most marks. For delicate or textured papers, dry cleaning with a wallpaper dough or a soft brush is safer than any liquid. Always test a hidden corner first to check colourfastness.
Small tears and lifted edges can be repaired with a little overlap adhesive and a seam roller. For larger damage, cut a patch from a spare offcut, align the pattern carefully, and feather the edges with a sharp blade before pressing into place.
Knowing When to Redecorate
Wallpaper has a lifespan, and even the best-hung covering will eventually show its age. Fading, persistent bubbling, and seams that refuse to stay down are clear signals that it is time to start again. In damp-prone rooms, inspect annually for signs of mould behind seams.
When that day comes, you will be glad you kept spare rolls and noted the batch numbers. A well-documented project is far easier to refresh, and the lessons you learned covering wallpaper the first time will make the second attempt noticeably faster and cleaner.
Whether you are lining a hallway to hide decades of lumpy plaster or layering a bold pattern over a neutral base, the key is to respect the surface underneath. Take the extra hour to test adhesion, seal the wall properly, and choose an adhesive that matches your paper's weight, and the finish will reward you every time you walk past it. If you are planning a room refresh this season, start with a small test patch and let the wall tell you what it needs before you commit to the full job.