Claire's DIY Spa Set: Step-by-Step Candle Tutorial
Indulge in a luxurious spa day at home with Claire's DIY Spa Set. Aromatic candles are not only visually appealing but also enhance your relaxation experience. Here's a step-by-step guide to creating your own soothing spa candles.
Before you begin, gather your materials. You'll need soy wax flakes, wicks, a double boiler, a thermometer, essential oils (like lavender, eucalyptus, or peppermint), a large glasslike jar, a wooden spoon, and scissors.
Melting the Wax
Safety first! Ensure your work area is well-ventilated, and wear old clothing as you may deal with some heat and wax spills.



Fill the bottom of your double boiler with about an inch of water and bring it to a low boil. Place the wax flakes into the top pan oruvieron bowl. Once the water is boiling, reduce the heat to low and place the top pan over it. Allow the wax to melt gently, stirring occasionally with a wooden spoon.
Adding Aromatic Oils
The ideal scent ratio is 1 oz of essential oil per pound of wax. For example, if you're using 2 pounds of wax flakes, you'll need 2 oz of essential oil.



Once the wax is completely melted (around 180°F or 82°C), remove it from the heat. Using a funnel, add your chosen essential oil(s). Stir until fully incorporated.
Preparing the Wick
While the wax is melting, prepare your wicks. Trim the wick to about an inch taller than your jar. Dip the bottom into the melted wax, then place it in the center of the jar.
Use a pencil or skewer to hold the wick in place while the candle cools. You can also place a small amount of wax on the bottom of the jar to help secure the wick.






Pouring the Wax
Allow the wax to cool to around 135°F (57°C) before pouring it into the jar. This helps the candle set properly and prevents warping.
Slowly pour the wax into the jar, leaving some space at the top for when the candle burns. Be careful not to disturb the wick as you pour.
Setting the Wick
Once the wax is poured, immediately straighten the wick. It should be taut and centered. If it's not, gently guide it back into position.

Allow the candle to cool undisturbed for at least 24 hours until fully set. Once cooled, you can trim the wick to about 1/4 of an inch before lighting.
Now, sit back, light your homemade aromatherapy candle, and enjoy your personalized spa day at home. Don't forget to place the candle on a heat-resistant surface and never leave it unattended while lit.





