3 Easy Cheap DIY Steps for Above Ground Pools
Tired of struggling with expensive, store-bought pool steps that just don't fit your above-ground pool? Why not try building your own DIY pool steps? Not only is it a cost-effective solution, but it's also a rewarding experience. Let's dive in and explore how you can create cheap DIY pool steps for your above-ground pool.
Building your own pool steps doesn't require extensive carpentry skills. With the right materials and some patience, you can construct sturdy, safe, and attractive steps that complement your pool's aesthetic. So, let's get started and transform your pool area into a beautiful outdoor oasis.
Materials and Tools Needed
Before you begin, gather your materials and tools. Here's a simple list to get you started:



- Pressure-treated lumber (for longevity and rust resistance)
- endemic pressure-treated deck screws and lag bolts
- Cement blocks or pavers (optional, for added support and durability)
- Power tools: Circular saw, Drill, Screwdriver, Tape measure, Safety glasses, Work gloves
Planning Your Pool Steps
First, determine the size and depth of your pool and where you want to place the steps. Ensure the steps are long and wide enough for safe and comfortable access. Also, consider the height of each step to ensure they're not too high or low for your users.
Using a tape measure, mark out the dimensions of your pool steps on the lumber. Cut the lumber according to your measurements. Remember to account for the width of the steps as well as the depth of the pool.



Building the Framework
Start by assembling the frame of your steps. Attach two 2x10 pieces of lumber together with screws to form the main frame. Ensure the frame is sturdy and square by verifying the diagonal measurements are equal.
Create the stringers (the supportive pieces that hold the steps) from 2x8 lumber. Cut the stringers to size, then attach them to the frame using 3-inch screws. Ensure the stringers are spaced evenly, usually around 12 inches apart.
Installing the Steps
Now that the framework is set, it's time to install the actual steps. Cut the steps from 5/4x6 decking or 2x6 lumber. Ensure the steps overhang the stringers by about 1.5 inches to provide ample space for feet.






Position the steps on the stringers and secure them with 2.5-inch screws. Stagger the joints between adjacent steps for added strength and prevent water from pooling on the steps. Ensure each step is level and firmly attached.
Stabilizing the Steps
To ensure the stability of your DIY pool steps, you can optionally embed cement blocks or pavers in concrete beneath the steps. This provides additional support and prevents the steps from shifting over time.
Dig out the area beneath the steps, place the cement blocks or pavers, and pour concrete around them. Allow the concrete to cure before using the steps to ensure maximum support and durability.

Finishing Touches
Once the concrete has cured and the steps are secure, you can apply a finish that protects the lumber and adds a touch of style. Choose a waterproof sealant that's designed for outdoor use and compatible with pressure-treated lumber.
Apply the sealant evenly, following the manufacturer's instructions. Allow the sealant to dry completely before using the pool steps. This process not only shields the steps from the elements but also enhances their visual appeal.
With a little time, effort, and some basic DIY skills, you can create cheap DIY pool steps that are both functional and stylish. Enjoy your newly renovated pool area and take pride in the fact that you've enhanced it with a unique, handmade touch!




