ceramic glaze recipes cone 10

Ceramic Glaze Recipes Cone 10: 25+ High-Fire Glazes for Stunning Results

By Thomas Wilson
AD

Searching for dependable ceramic glaze recipes cone 10 can feel like learning a new language, because high-fire glazes behave very differently from their mid-range cousins. The materials are often the same, but the ratios, melting behavior, and firing atmosphere demand a deeper understanding of glaze chemistry. Whether you fire in reduction or oxidation, a cone 10 glaze can produce surfaces that are deep, complex, and impossible to replicate at lower temperatures.

Cone 10 is roughly 2380°F (1305°C), a range where clay bodies vitrify and glazes fully mature. At this temperature, minor changes in recipe or kiln atmosphere can shift color, texture, and fit. That sensitivity is exactly why potters keep detailed notebooks and why a single line blend can reveal more than a dozen failed tests. The recipes below are starting points, not sacred formulas, so treat them as invitations to experiment.

Understanding Cone 10 Ceramic Glaze Recipes

At cone 10, the boundary between glaze and clay body becomes blurry. Silica and alumina from the clay can interact with the glaze, while fluxes in the glaze migrate into the body. This exchange creates depth, but it also means a recipe that looks perfect on one clay may craze, crawl, or run on another. High-fire potters learn to read the glaze as a system rather than a list of ingredients.

AD
a person holding a blue ceramic vase with information about the top ten things in it
a person holding a blue ceramic vase with information about the top ten things in it
a brochure with pictures of bowls and other items for sale on the front page
a brochure with pictures of bowls and other items for sale on the front page
an image of a menu with food items on the plate and in the background, there is a recipe book
an image of a menu with food items on the plate and in the background, there is a recipe book

Another key variable is atmosphere. Reduction firing pulls oxygen from the glaze and clay, causing iron to shift toward blue-green celadons or deep tenmokus, and copper toward oxblood reds. Oxidation firing keeps colors cleaner and more predictable, but it can also make iron glazes look rusty brown instead of moody and layered. Your kiln, your fuel, and your firing schedule all become part of the recipe.

Core Oxides and Their Roles in High-Fire Glazes

Silica (SiO2) is the glass former. Without enough silica, the glaze will not form a durable surface; with too much, it may remain dry or underfired. Alumina (Al2O3) acts as a stabilizer, increasing viscosity and preventing the glaze from running off the pot. The balance between silica and alumina determines whether a glaze is glossy, satin, or matte at cone 10.

CERULEAN HEAVEN AKA DALY’S #2 RED (but it comes out blue!) cone 10 reduction–D.J. Brewer
CERULEAN HEAVEN AKA DALY’S #2 RED (but it comes out blue!) cone 10 reduction–D.J. Brewer
Recipes: Cone 6-10 Recipes to Highlight Texture and Provide Contrast
Recipes: Cone 6-10 Recipes to Highlight Texture and Provide Contrast
Recipes: Cone 6-10 Glazes From Matte to Shiny and Colorful to Clear
Recipes: Cone 6-10 Glazes From Matte to Shiny and Colorful to Clear

Fluxes such as sodium, potassium, calcium, magnesium, barium, zinc, and lithium lower the melting point. Each flux brings its own character: calcium promotes durability and bright colors, magnesium can create opacity and matte surfaces, barium can produce unusual blues, and lithium can increase thermal shock resistance. A good cone 10 recipe uses a blend of fluxes rather than relying on one, which helps avoid defects like shivering or leaching.

Essential Materials for Cone 10 Recipes

Feldspars are the backbone of most high-fire glazes. Custer feldspar, G-200 feldspar, Kona feldspar, and nepheline syenite supply potassium, sodium, and alumina while melting into a durable glass. Whiting, wollastonite, talc, barium carbonate, zinc oxide, and lithium carbonate adjust the melt and surface quality. Kaolin and bentonite add clay content, which keeps the glaze in suspension and improves application.

AD

Colorants and opacifiers should be added with care. Iron oxide produces celadons, tenmokus, and rusts depending on percentage and atmosphere. Copper carbonate or copper oxide creates copper reds and turquoise in oxidation. Cobalt carbonate gives strong blues, rutile encourages variegation, and tin oxide or zirconium silicate opacifies. Always wear a respirator, use gloves, and avoid inhaling raw materials, especially barium, cobalt, and copper compounds.

15+ Tried & True Cone 10 Glaze Recipes
15+ Tried & True Cone 10 Glaze Recipes
Master Cone 6 Glazes: Spinning Pots Edition
Master Cone 6 Glazes: Spinning Pots Edition
cone 6 glaze recipes 10 tried & true - Ceramic Arts Daily
cone 6 glaze recipes 10 tried & true - Ceramic Arts Daily
Cone 6 glazes, bowls, tiles, and tomato sex!!
Cone 6 glazes, bowls, tiles, and tomato sex!!
Cone 10 Glaze Ideas You'll Want to Fire in Your Next Kiln Load
Cone 10 Glaze Ideas You'll Want to Fire in Your Next Kiln Load
99 Cone 6 Glazes You Can Try – Sue McLeod Ceramics
99 Cone 6 Glazes You Can Try – Sue McLeod Ceramics

Reliable Cone 10 Glaze Recipes and Firing Strategies

Base recipes are launchpads. A classic high-fire base often contains about 40 to 50 percent feldspar, 20 to 25 percent silica, 15 to 20 percent whiting, and 10 to 15 percent kaolin. From there, you can add colorants, opacifiers, or secondary fluxes to push the surface in a new direction. The best approach is to test a small line blend, changing one ingredient at a time and firing the tiles together.

Firing strategy matters as much as chemistry. In reduction, start reducing around cone 012 to cone 010, then maintain a light reduction through the body reduction and into the glaze melt. In oxidation, a clean ramp with a short soak at maturity can smooth out pinholes and improve gloss. Cooling slowly can encourage crystallization in iron and titanium glazes, while a faster cool keeps colors brighter and surfaces smoother.

AD

Classic Celadon and Copper Red Recipes

A traditional celadon base for cone 10 reduction can start with Custer feldspar 40 percent, silica 25 percent, whiting 20 percent, kaolin 10 percent, and talc 5 percent. Add iron oxide at 1 to 3 percent for pale blue-green, or closer to 3 to 4 percent for a deeper sea-green. Apply thinly to medium, fire in reduction, and cool slowly for the best depth. On porcelain, this recipe often produces a luminous, crackle-free surface.

an image of some sort of green stuff in the middle of a page with text on it
an image of some sort of green stuff in the middle of a page with text on it
top ten cone 6 glaze recipes - Ceramic Arts Daily
top ten cone 6 glaze recipes - Ceramic Arts Daily
Crystalline Glazes: Creating Cone 10 Crystalline Glazes in Reduction
Crystalline Glazes: Creating Cone 10 Crystalline Glazes in Reduction
Client Challenge
Client Challenge

For a copper red, try Custer feldspar 40 percent, silica 25 percent, whiting 20 percent, kaolin 10 percent, barium carbonate 5 percent, copper carbonate 0.5 to 1 percent, and tin oxide 1 to 2 percent. Reduction is essential; without it, the copper will likely turn green or gray. Keep the glaze application even, avoid excessive copper, and fire in a kiln that reduces reliably. Small variations in copper and tin can mean the difference between a blood red and a muddy purple.

Tenmoku, Shino, and Ash Glaze Approaches

Tenmoku is an iron-rich glaze that breaks over edges and pools into deep brown-black where thick. A dependable cone 10 recipe is Custer feldspar 45 percent, silica 20 percent, whiting 15 percent, kaolin 10 percent, and iron oxide 10 percent. Reduce the iron to 8 percent for a lighter tenmoku, or increase it slightly for a darker surface. In reduction, it can develop oil spots and rust crystals; in oxidation, it stays closer to a glossy dark brown. Apply a little thicker than celadon to encourage breaking and pooling.

AD

Shino glazes rely on feldspar, clay, and a small amount of soda ash or spodumene to create a soft, orange-peel surface. A simple cone 10 shino can be Custer feldspar 50 percent, kaolin 20 percent, spodumene 10 percent, soda ash 5 percent, and silica 15 percent. Ash glazes are less predictable but often stunning: start with wood ash 30 percent, feldspar 40 percent, clay 20 percent, and silica 10 percent, then adjust based on the ash source. Always sieve ash thoroughly and test it on small tiles before committing to a large piece.

The real test is not the recipe in a book, but the test tile on your shelf. Keep a firing log, note the clay body, glaze thickness, atmosphere, and cooling cycle, and compare results side by side. Over time, you will develop a personal palette of cone 10 surfaces that no online formula can replace. Pull out your notebook, weigh a small batch, and let the kiln teach you what the next line blend should be.

AD