Cedar as Firewood: Pros, Cons, and Is It Worth Burning?
Cedar is one of the most divisive fuels you can toss into a woodstove. Some homeowners swear by it for its crackling, aromatic flame, while others warn that it burns too fast and leaves too much mess behind. The truth sits somewhere in the middle, and it depends heavily on which cedar you have, how it was seasoned, and what you're asking it to do. Understanding where cedar fits into a wood-burning routine will save you money, keep your chimney cleaner, and help you get more out of every cord.
If you have access to cedar — whether from a felled backyard tree, a storm-damaged limb, or a bundle from the local hardware store — it pays to know exactly what you're working with before you load up the fireplace. This guide breaks down the burn characteristics, the practical applications, the drawbacks, and the best practices for harvesting and storing cedar firewood so you can use it confidently instead of guessing.
Burning Characteristics of Cedar Firewood
Cedar is a softwood, which immediately tells you something important about how it behaves in a fire. Softwoods generally have lower density than hardwoods like oak, hickory, or maple, which means fewer pounds of actual wood fiber packed into the same volume of space. Less density translates to less stored energy, so a cord of cedar simply won't deliver the same long, slow heat as a cord of dense hardwood.
What cedar lacks in staying power, it makes up for in eagerness. The wood is loaded with volatile oils and resins that ignite at relatively low temperatures, which is why cedar kindling catches so readily and why the wood produces that distinctive sharp, spicy aroma when it burns. That same resin content, however, is what creates the popping, sparking, and fast consumption that frustrate people who try to heat a house with cedar alone.
Heat Output and BTU Rating
Heat output in firewood is measured in British thermal units, or BTUs, and the numbers for cedar land firmly in the lower-middle range of the firewood spectrum. Most cedar species produce roughly 12 to 13 million BTUs per air-dried cord, which puts them slightly below white pine and well below Douglas fir or oak. For comparison, a cord of white oak can push past 24 million BTUs, nearly double what cedar delivers.
That gap matters most in cold climates where you're relying on wood as a primary heat source through a long winter. In milder regions, or during spring and fall when you only need to take the chill off a room, cedar's lighter heat output is perfectly adequate. The table below gives a rough sense of how cedar stacks up against common alternatives.
| Wood Species | Approximate BTU per Cord (millions) | Relative Density |
|---|---|---|
| Eastern Red Cedar | 12 – 13 | Low |
| Western Red Cedar | 12.5 – 13.5 | Low |
| White Pine | 14 – 15 | Low |
| Douglas Fir | 18 – 21 | Medium |
| White Oak | 23 – 25 | High |
Ignition, Seasoning, and Burn Speed
Cedar's ignition qualities are genuinely excellent. Because it's a low-density softwood with a high resin content, it dries quickly and lights with minimal persuasion. Split cedar can season in as little as six months in a well-ventilated stack, sometimes faster in hot, dry, breezy conditions — a huge advantage over oaks and other dense hardwoods that can demand a full year or more before they're ready to burn cleanly.
The trade-off is burn speed. Cedar throws heat fast and then collapses into coals quickly, which means you'll be reloading the stove far more often than you would with hardwood. If you're trying to hold a fire overnight, cedar is the wrong tool for the job. If you want a fire that flames up instantly and puts visible warmth into a room within minutes, cedar is hard to beat.
Practical Uses and Drawbacks of Cedar Firewood
Thinking of cedar as a specialty fuel rather than a staple changes how you use it. It shines in specific roles — ignition, quick warmth, ambiance, outdoor cooking — and struggles in others. Matching the wood to the task is the single most useful mindset you can adopt if you have a lot of cedar on hand.
There are also genuine safety and maintenance considerations that come with burning resinous softwoods. None of them are dealbreakers, but ignoring them can lead to a dirty chimney, damaged screens, or an unpleasant surprise in the middle of a quiet evening by the fire.
Cedar as Kindling and Fire-Starting Fuel
This is where cedar earns its keep. Split cedar produces thin, resin-rich pieces that catch a flame almost instantly, making it one of the best natural fire starters available. A few splits placed under larger hardwood logs will get a stubborn fire going in a fraction of the time it would take with newspaper and cardboard alone.
Beyond the fireplace, cedar scraps and split pieces are excellent for campfires, chimineas, and outdoor fire pits. The aroma is part of the appeal for many people, though it's worth noting that cedar smoke is pungent and not ideal for cooking over directly unless you like that flavor. Bakeries and pizzerias sometimes use cedar or cedar-adjacent softwoods for a quick, hot initial burn before switching to a clean-burning hardwood for the actual cook.
Creosote, Sparks, and Safety Considerations
Creosote is a tar-like byproduct of incomplete combustion that accumulates inside chimneys, and it's the leading cause of chimney fires. Resinous softwoods like cedar have a reputation for contributing to creosote buildup, though the bigger culprit is usually burning unseasoned wood at low temperatures with restricted airflow. Dry cedar burned hot in a properly vented appliance produces far less creosote than wet hardwood smoldering in a choked-off stove.
Sparks are a more immediate concern. Cedar pops and throws embers more than most hardwoods, which makes it a poor choice for an open fireplace without a spark screen and a risky choice near dry grass, leaves, or a low roof overhang. Never burn cedar in an open hearth while children or pets are close by, and always keep a screen in place. In a fully enclosed woodstove or fireplace insert, sparking is largely a non-issue.
Harvesting, Seasoning, and Storing Cedar
Cedar is often available for free or cheap because it grows fast, gets removed from properties frequently, and isn't prized as a heating fuel by most wood burners. That availability is a real advantage if you're willing to put in the work of processing it. Green cedar is heavy with moisture and won't burn worth a darn until it's dried, so a little patience goes a long way.
The good news is that cedar's low density works in your favor during the seasoning process. Moisture escapes more easily from less dense wood, which is why cedar can go from freshly cut to burn-ready in a single season rather than the year or more that dense hardwoods require.
Seasoning Timelines and Techniques
Split cedar dries best when it's cut into smaller pieces and stacked loosely so air can move through the pile. Six months is a realistic target in most climates, and you can shorten that window by splitting it thinner and stacking it in a spot that gets full sun and consistent wind. A moisture meter is the only reliable way to know for sure — aim for 15 to 20 percent moisture content before you burn it.
Whole rounds of cedar take considerably longer to dry and are notorious for checking and cracking, which actually helps the drying process along. If you're working with larger logs, split them before stacking rather than trying to rush the process with unsplit rounds. Cedar left in contact with the ground will rot quickly, so get it up off the soil as soon as possible after cutting.
Storage and Pest Management
Store seasoned cedar in a stack that's elevated on pallets or rails, covered on top to shed rain, and open on the sides to allow airflow. Avoid tarping the whole pile, which traps moisture and undoes months of drying. Keep the stack at least a few inches away from your house or garage to discourage insects and rodents from using it as a bridge.
Cedar has a natural advantage here: its aromatic oils are traditionally used as an insect deterrent, and cedar chests and closet liners are a classic example of that reputation. It's not a guarantee against pests, especially carpenter ants already living in a dying tree, but cedar firewood generally attracts fewer insects than sweeter-smelling hardwoods. Still, don't store cedar indoors for extended periods, and always burn older stock first.
Cedar isn't going to replace oak or maple as the backbone of a serious winter heating plan, and it was never meant to. Treat it as what it is: a fast, fragrant, easy-lighting fuel that excels at getting a fire going, warming up a cool room quickly, and making a backyard fire pit feel like an occasion. Stack what you have, let it dry properly, mix it with denser hardwoods for longer burns, and you'll get real value out of a wood that most people simply burn and forget.