Briggs and Stratton Date Code: How to Read and Decode Your Engine's Age
If you own a Briggs & Stratton engine, the small metal or sticker label on the blower housing holds more than just a model number. One line, called the Code, is a compact Briggs and Stratton date code that reveals exactly when the engine was built. That single piece of information can help you order the right parts, verify warranty coverage, or date a used mower before you buy it.
Many people mistake the Code for a serial number or ignore it entirely. In reality, the Briggs & Stratton date code is a structured eight-digit sequence that can be read in seconds once you know the format. The rest of this guide explains where to find it, how to decode it, and why it matters for maintenance and repairs.
Locating the Briggs & Stratton Date Code
The date code is not stamped into the crankshaft or hidden inside the engine. It appears on the official engine identification label, which Briggs & Stratton places on the blower housing, valve cover, or air cleaner assembly. On many walk-behind mowers, the label is a silver sticker on the front or top of the blower housing. On riding mowers and pressure washers, look near the oil fill, valve cover, or starter housing.
If the sticker is missing or unreadable, check for a stamped metal plate or a laser-etched code on the engine block. Some older engines have the Code stamped directly into the blower housing. Cleaning the area with a rag and a little brake cleaner can make faded digits legible without damaging the label.
Where the Engine Identification Label Is Placed
Briggs & Stratton uses several label locations depending on engine series. Horizontal shaft engines often have the label on the blower housing facing the operator. Vertical shaft engines, common on lawn mowers, usually carry the label on the front of the blower housing or on the valve cover. Overhead valve engines may place it on the rocker cover.
If you cannot find the label on the engine, check the equipment manufacturer's manual. Some mower brands move the label to the frame or deck, but the Briggs & Stratton date code always refers to the engine label. A photo of the label with your phone makes it easy to read later in the garage.
Reading Model, Type, and Code Without Confusion
The engine label typically has three lines: Model, Type, and Code. The Model number identifies the engine family and displacement. The Type number narrows down the exact configuration, such as carburetor, governor, and starter type. The Code is the date code and sometimes includes plant information.
Do not confuse the Code with the Model. A Briggs & Stratton date code starts with two digits for the year, followed by two for the month and two for the day. The Model number, by contrast, is usually five or six digits and may include a letter. When ordering parts, always provide all three numbers, but use the Code specifically for dating the engine.
Decoding the Briggs & Stratton Date Code
Once you have the Code, decoding it is straightforward. The standard Briggs & Stratton date code uses eight digits. The first two digits represent the year, the next two the month, and the next two the day. The final two digits indicate the manufacturing plant or production line. For example, Code 21031501 means the engine was built on March 15, 2021.
The format has remained consistent for decades, which makes it easy to compare engines from different eras. A Code beginning with 98 points to 1998, while a Code beginning with 08 points to 2008. The key is knowing how Briggs & Stratton handles year prefixes before and after the year 2000.
Year, Month, and Day: The First Six Digits
The first two digits are the year. For codes from 1965 through 1999, the year digits are 65 through 99. For codes from 2000 through 2029, the year digits are 00 through 29. So a Code starting with 99 is 1999, not 2099. A Code starting with 05 is 2005, not 1905. This distinction matters when you are buying parts for an older engine.
The next two digits are the month, from 01 for January to 12 for December. The following two digits are the day, from 01 to 31. A Code like 99011201 translates to January 12, 1999. A Code like 08051201 translates to May 12, 2008. Always read the digits in pairs from left to right, and do not skip the leading zero.
Plant and Production Suffix: The Last Two Digits
The final two digits of the Briggs & Stratton date code are often called the plant code, line code, or production suffix. They do not affect the manufacturing date, but they can indicate where the engine was assembled or which production line built it. Common suffixes include 01, 02, 03, and so on.
For most owners, the last two digits are not needed for parts ordering or warranty. However, they can be useful for collectors or technicians who want to match an engine to a specific factory batch. If you are documenting a restoration, record the full Code, including the suffix, in your notes.
Knowing how to read a Briggs & Stratton date code puts you in control of maintenance, parts shopping, and even resale value. The next time you look at an engine label, take a close-up photo of the Model, Type, and Code. With those three numbers saved on your phone, you can decode the age in seconds and move forward with the right parts or service information.