blue max chainsaw 20 replacement chain

Blue Max Chainsaw 20 Replacement Chain - Sharp & Durable

By Rachel Lopez
AD

When a Blue Max chainsaw stops pulling itself through a log, the bar isn't always the culprit. More often, the cutters are dull, the drive links are worn, or the chain has stretched past the point of safe adjustment. That's when a Blue Max chainsaw 20 replacement chain becomes the smart fix, especially if your saw still has strong compression and a good bar.

But buying a 20-inch loop isn't like grabbing a generic pack of spark plugs. A replacement chain has to match the saw's pitch, gauge, and drive-link count, or it simply won't seat correctly on the sprocket and bar. The right chain restores cutting speed, reduces kickback risk, and helps your Blue Max saw run the way it did when it was new.

Understanding the Blue Max 20 Replacement Chain

The Blue Max 20 replacement chain is a complete loop designed for a 20-inch guide bar. It includes cutters, tie straps, rivets, and drive links that ride inside the bar groove and engage the drive sprocket. Even a small mismatch in any of those dimensions can cause poor oiling, premature wear, or a chain that jumps off during a cut.

AD
Blue Max Chainsaw | Affordable Gas Power
Blue Max Chainsaw | Affordable Gas Power
How to Mix Chainsaw Fuel
How to Mix Chainsaw Fuel
Blue Max 18-inch Chain Saw - Overstock - 9375245
Blue Max 18-inch Chain Saw - Overstock - 9375245

Most Blue Max 20-inch saws are homeowner or farm-duty gas models, so the factory chain is usually a low-kickback or semi-chisel design. That's a good starting point for replacement, but you can also upgrade to a faster-cutting chain if you're comfortable with the extra aggression. The key is to treat the bar and sprocket as a system, not just a length.

Critical Specifications to Match

Three numbers matter more than anything else: pitch, gauge, and drive-link count. Pitch is the distance between three consecutive rivets divided by two, and it's usually expressed as 3/8-inch low profile or .325-inch. Gauge is the thickness of the drive-link tang that fits into the bar groove, commonly .050-inch or .058-inch. Drive-link count is the number of links that wrap around the bar and sprocket.

Stihl 3670-000-0072 PM3 Chainsaw Chain
Stihl 3670-000-0072 PM3 Chainsaw Chain
Blue Max 2-In-1 20 in. and 14 in. 45cc Gas Chainsaw Combo with Blow Molded Case 8902 - The Home Depot
Blue Max 2-In-1 20 in. and 14 in. 45cc Gas Chainsaw Combo with Blow Molded Case 8902 - The Home Depot
What Is The Best Blue Max Chainsaw? Or Should You AVOID?
What Is The Best Blue Max Chainsaw? Or Should You AVOID?

Many Blue Max 20-inch models use a 3/8-inch low-profile pitch, .050-inch gauge, and 70 drive links. That combination is often printed on the bar itself, near the tail, or listed in the owner's manual. If your bar says 70DL, .050, and 3/8 LP, you can search for a 20-inch replacement chain with those exact specs. If it says something else, trust the bar markings over a generic product description.

Why a 20-Inch Bar Doesn't Guarantee Fit

Bar length is only one piece of the puzzle. Two 20-inch bars can use different drive-link counts depending on the pitch, the bar's tail design, and the saw's sprocket size. A chain that's too short won't reach around the sprocket, while a chain that's too long won't tension correctly and can derail.

AD

For example, a 20-inch bar running 3/8-inch low-profile chain might take 70 drive links, while a 20-inch bar running .325-inch chain could take a different count. Blue Max did not use one universal 20-inch setup across every model year, so guessing can lead to returns, wasted money, and a frustrating afternoon. Count the drive links on your old chain or check the bar stamp before ordering.

a blue and black electric chainsaw with glasses on it
a blue and black electric chainsaw with glasses on it
Chaîne Super 20 325 OREGON 76 dents - 21LPX072E
Chaîne Super 20 325 OREGON 76 dents - 21LPX072E
Powerful and Versatile, Experience Precision Cutting with the Hyundai 40V Battery 14" Chainsaw with an Oregon Bar
Powerful and Versatile, Experience Precision Cutting with the Hyundai 40V Battery 14" Chainsaw with an Oregon Bar

Choosing the Right Chain for Performance and Safety

Once you know the specs, you can choose between an OEM Blue Max chain and an aftermarket replacement. OEM chains are built to the original equipment specifications, but they aren't always the best value or the easiest to find locally. Aftermarket brands often offer better metallurgy, improved oiling, and multiple cutter options.

Your choice also affects how the saw feels in the cut. A low-kickback chain is forgiving and safer for occasional users, while a full-chisel chain slices faster but demands more control. For a 20-inch Blue Max saw, the sweet spot is usually a high-quality semi-chisel or low-kickback chain that stays sharp in dirty firewood.

AD

OEM vs Aftermarket Chains

An OEM Blue Max replacement chain is the safest bet if you want an exact match without measuring. It will have the same pitch, gauge, and drive-link count as the chain that came with the saw, and it's designed to work with the factory bar and sprocket. The downside is that OEM chains can be expensive and may not be stocked at every dealer.

Aftermarket chains from brands like Oregon, Husqvarna, and TriLink can be excellent alternatives. For a 20-inch Blue Max with 3/8-inch low-profile, .050-inch gauge, and 70 drive links, common cross-references include Oregon 91PX070 and 91VXL070. These chains use the same dimensions, but they may have different cutter profiles, anti-vibration features, or low-kickback bumpers. Always confirm the specs before buying.

Low-Kickback vs Full-Chisel Cutters

Low-kickback chains have a bumper link or a modified cutter shape that reduces the chance of violent kickback when the nose of the bar contacts wood. They cut a little slower than professional chains, but they are much more forgiving for homeowners, storm cleanup crews, and anyone who doesn't cut wood every day.

AD

Full-chisel chains have sharp, square-cornered cutters that bite aggressively and clear chips quickly. They're fast in clean softwood and hardwood, but they require a steady hand, proper technique, and frequent sharpening. Semi-chisel chains sit in the middle: they cut reasonably fast, handle dirty wood better, and are less likely to grab. For most Blue Max 20 owners, semi-chisel or low-kickback is the practical choice.

Installing, Maintaining, and Buying Smart

A new chain only performs well if it's installed correctly and maintained consistently. A loose chain can derail and damage the bar, while an overly tight chain can burn up the bar nose and sprocket. Installation takes only a few minutes, but it's worth doing carefully with the saw turned off and the spark plug boot removed.

Maintenance is just as important. Keep the bar groove clean, fill the oil reservoir every time you refuel, and check tension after the first few cuts because new chains stretch. Sharpening at the right angle with the correct file size preserves cutting speed and reduces strain on the engine.

Step-by-Step Replacement

Start by putting on gloves and making sure the engine is off. Pull the spark plug boot to prevent accidental starts, then remove the bar nuts and side cover. Take the old chain off the bar and sprocket, and wipe away sawdust and old oil from the bar groove and oil holes. Clean the sprocket area and inspect the drive sprocket for worn teeth.

Place the new chain on the bar with the cutters facing forward on the top of the bar. Loop the chain around the drive sprocket, fit the bar onto the studs, and reinstall the side cover and tension adjuster. Tighten the bar nuts finger-tight, adjust the chain tension until it snaps back against the bar with light pull, then tighten the nuts firmly. Run the saw briefly, let it cool, and recheck tension before cutting.

Tension, Lubrication, and Sharpening

Proper tension means the chain is tight enough to stay in the bar groove but loose enough to pull around by hand. You should be able to lift the chain slightly from the middle of the bar and see it snap back. Check tension before every use and after every few cuts with a new chain. If the chain sags or feels tight enough to bind, adjust it before you start the saw.

Bar oil is the chain's lifeline. Keep the reservoir full and use a quality bar-and-chain oil, not motor oil or waste oil. Sharpen the cutters with a file that matches the chain pitch—5/32-inch for most 3/8-inch low-profile chains—and keep the depth gauges at about .025-inch. A sharp chain cuts faster, uses less fuel, and puts less stress on the engine and bar.

How to Verify Fit and Where to Buy

Before buying, look for markings on the guide bar. You'll often find the length, pitch, gauge, and drive-link count stamped near the tail. If the stamp is worn, check the owner's manual or count the drive links on the old chain. Count them twice, and write the number down. Also measure the gauge if you have a caliper or take the old chain to a local dealer for a match.

You can buy a Blue Max chainsaw 20 replacement chain from farm stores, outdoor power equipment dealers, and online retailers. Search using the exact specs rather than just the saw model, and check the return policy in case the fit isn't right. Buying two chains is a smart move if you cut frequently: one stays on the saw while the other is sharpened or ready as a backup.

Signs It's Time to Replace

A chain that needs constant tensioning is often stretched beyond safe use. Other signs include broken or missing cutters, cracked tie straps, worn drive links, and a chain that won't stay sharp after filing. If the chain has hit dirt, rocks, or metal, inspect it closely for damaged links before using it again.

Replacing the chain is also wise when the cutters are worn down to the point that sharpening takes too long or changes the chain's profile. A new chain is inexpensive compared with the cost of a damaged bar or sprocket. If you notice the saw cutting in a curve, producing fine dust instead of chips, or requiring heavy pressure, the chain is likely dull or worn out.

Before you head back to the woodpile, confirm your pitch, gauge, and drive-link count, then choose a chain that matches your cutting style. A well-fitted Blue Max chainsaw 20 replacement chain will bring back the saw's bite, keep your bar and sprocket healthier, and make every tank of fuel go further. Keep a spare on the shelf, and you'll never lose a cutting day to a dull or broken loop.

AD