Bead Size Chart: Easy Guide to MM, Inches, and Bead Sizes
If you have ever stood in a craft store or browsed an online bead shop and felt lost between labels like 8/0, 11/0, 4mm, and 6mm, you are not alone. A bead size chart is the quiet translator that turns those numbers into a clear picture of diameter, hole size, and best uses, so you can choose beads with confidence.
Whether you are weaving a delicate seed bead bracelet, stringing gemstone rounds, or adding spacers to a necklace, the right size affects drape, durability, and how easily your thread or wire passes through. This guide breaks down the essential bead size chart categories and gives you practical reference points for common materials.
Understanding Bead Size Measurements
Bead sizes are not one universal system. Round beads are usually measured by diameter in millimeters, while seed beads use a traditional aught size that often looks like a fraction, such as 6/0 or 11/0. Inches may appear on older patterns or US product listings, so a good bead size chart helps you move between all three.
It is also important to separate bead diameter from hole size. A bead can look small but have a generous hole, or look large but only accept a thin needle. When you use a bead size chart, check both columns if you are working with thick cord, leather, elastic, or multi-strand wire.
Millimeters, Inches, and the Aught System
In the metric system, one inch equals 25.4 millimeters, which makes conversion straightforward once you memorize a few anchors. A 2mm bead is roughly 5/64 inch, 3mm is about 1/8 inch, 4mm is close to 5/32 inch, 6mm is about 1/4 inch, 8mm is around 5/16 inch, 10mm is near 3/8 inch, and 12mm is just under 1/2 inch.
The aught system works in the opposite direction: the larger the number, the smaller the bead. An 11/0 seed bead is smaller than an 8/0, and a 15/0 is smaller still. As a rough bead size chart guide, 6/0 is about 4mm, 8/0 is about 3mm, 11/0 is about 2.1mm, and 15/0 is about 1.5mm, though manufacturer tolerances can shift these numbers slightly.
Why Hole Size Matters as Much as Diameter
A bead size chart that lists only diameter can lead to frustrating project stalls. If you plan to use 1.5mm leather cord, a 6mm bead with a 1mm hole simply will not work, no matter how perfect the color is. Hole size is the gatekeeper for needles, thread, stringing wire, and cord.
Czech seed beads often have slightly larger holes than Japanese seed beads, and gemstone beads can vary widely depending on the stone and drilling method. Always read the product details for hole size, or keep a physical sample card on hand. When in doubt, choose a bead with a hole at least 0.2mm larger than your thickest cord or needle.
Practical Bead Size Chart by Material and Use
Different bead types have different sizing quirks, so a single bead size chart is most useful when it is organized by material and project style. Seed beads, round gemstones, pearls, glass, wood, and metal spacers all follow their own conventions, and mixing them without checking sizes can throw off a pattern.
The sections below give you quick references for the two most common categories: tiny seed beads for weaving and round beads for stringing. Use them as a starting point, then verify the specific product listing because even reputable manufacturers can vary by batch.
Seed Bead Size Chart and Common Uses
Seed beads are sold by aught size, and that number tells you both scale and recommended technique. A 15/0 is ideal for intricate bead weaving and fine detail, 11/0 is the workhorse for loom work and embroidery, 8/0 is good for bead crochet and simple stringing, and 6/0 is a larger seed bead that works well for knitting with beads or bold spacers.
The following seed bead size chart gives approximate diameters and typical uses. Keep in mind that Czech, Japanese, and Chinese seed beads may differ slightly in hole size and consistency, even when they share the same aught number.
| Seed Bead Size | Approximate Diameter | Common Uses |
| 15/0 | 1.5 mm | Fine bead weaving, peyote stitch, detailed embroidery |
| 11/0 | 2.1 mm | Loom work, bead embroidery, general bead weaving |
| 10/0 | 2.3 mm | Delicate stringing, bead crochet, spacers |
| 8/0 | 3.0 mm | Bead crochet, simple stringing, fringe |
| 6/0 | 4.0 mm | Knitting with beads, large-hole stringing, bold accents |
Round Bead Size Chart for Stringing and Wirework
For round beads, the millimeter measurement is the diameter, and it is usually the most reliable number to shop by. A 4mm round bead feels delicate and works well for children's jewelry or subtle spacers, 6mm is a comfortable everyday size, 8mm makes a noticeable statement, and 10mm or larger is best for bold necklaces and chunky bracelets.
When you string round beads, account for the hole size as well as the outer diameter. A typical 4mm bead may have a 0.8mm to 1.0mm hole, a 6mm bead may have a 1.0mm to 1.2mm hole, and a 10mm bead may have a 1.5mm to 2mm hole. If you are using thick wire or multiple passes of thread, size up the hole or choose a larger bead to keep the project comfortable.
Keep a bead size chart near your workspace or save one to your phone before your next supply order. The more you compare millimeters, aught sizes, and hole measurements, the faster you will recognize which beads belong in your design, and the less time you will spend returning the ones that never had a chance to fit.