Bath Side Panel Installation: A Step-by-Step Guide
Installing a bath side panel can significantly enhance the safety and aesthetics of your bathroom. This step-by-step guide will walk you through the process, ensuring you understand each aspect for a successful installation.
Before we dive into the details, let's explore why installing a bath side panel is a worthwhile project. Not only does it provide a sleek, finished look, but it also prevents water from seeping behind the bath and causing damage to your walls. Additionally, it offers extra support, keeping your bath stable and secure.
Preparation and Tools Required
Before you start, ensure you have all the necessary tools and materials. This includes the side panel itself, silicone sealant, screwdriver, tape measure, spirit level, safety glasses, and a marker pen.



First, measure the height and width of the gap between your bath and the wall. The side panel you purchase should fit snugly in this space. Double-check the measurements to ensure you get the correct size.
Choosing the Right Side Panel
Side panels are typically made from acrylic or ABS plastic. They are often available in various colors and finishes to match your bath and bathroom decor. Measure carefully to ensure the panel you choose fits perfectly in your bathroom.



If you're unsure, purchase a slightly oversized panel and trim it down using a fine-toothed saw or a jigsaw. Always wear safety gear when cutting or handling sharp tools.
Safety First: Turn Off the Water Supply
Before you start any work around your bath, turn off the water supply. This ensures no water flows into your bath while you're working, reducing the risk of slips and trips.
Next, open your bath taps to release any water pressure. This will prevent water from shooting out when you turn the taps back on after the installation is complete.




Installing the Bath Side Panel
The installation process involves applying silicone sealant to the back of the panel, positioning it correctly, and securing it in place with screws.
First, apply a bead of silicone sealant along the top edge and both vertical edges of the panel. This will create a watertight seal between the panel and your bath and wall. Be careful not to get too much sealant as it can ooze out and make a mess.
Positioning the Panel
Carefully position the panel in the gap between your bath and the wall. Ensure it's level and vertically aligned with the edge of your bath. You may need a second person to help hold it in place.
Once you're satisfied with the position, hold the panel firmly in place. When ready, start screwing it into position, driving the screws into pre-drilled holes in the panel. Be careful not to overtighten the screws, which could crack the panel.
Finishing Touches
After the panel is securely fastened, wipe away any excess silicone sealant that may have squeezed out with a damp cloth. Allow it to dry for at least 24 hours before running water in your bath to allow the sealant to cure properly.
Once the sealant is dry, your bath side panel installation is complete. Resuming your normal bathroom routine is now safe and easy.
Installing a bath side panel is a simple home improvement project that can make a significant difference to your bathroom. By following these steps, you can ensure a successful installation that will add functionality and aesthetic appeal to your space. Enjoy your newly updated bathroom!





