8n ford tractor tires

8N Ford Tractor Tires: Best Sizes, Options & Buying Guide

By Brian Brown
AD

The Ford 8N is one of the most beloved compact tractors ever built, and more than seven decades after the last one rolled off the line, thousands are still earning their keep on small farms, horse properties, and hobby acreages. Ask any owner what makes the biggest difference in how an 8N performs, and you will hear the same answer again and again: tires. The right set of rubber turns a tired old workhorse into a sure-footed machine that pulls a plow, hauls a wagon, and climbs a muddy slope without spinning a wheel.

Buying Ford 8N tractor tires is not as simple as ordering a modern size and bolting it on, though. The tractor was designed around a specific set of bias-ply agricultural tires, and those original dimensions affect ground speed, fender clearance, rim fitment, and even how fast PTO-driven equipment runs. This guide walks through factory sizes, modern equivalents, tread patterns, inflation pressure, and ballasting so you can order the right set the first time.

Decoding the Factory Tire Sizes on a Ford 8N

Ford built the 8N from 1947 through 1952 and produced roughly 524,000 of them, which is a big part of why parts and tire options remain so easy to find today. From the factory, the tractor rolled out on 4.00-19 front tires mounted on narrow 19-inch rims, paired with 10-28 rear tires on 28-inch rims. Optional rear fitments included the 11-28, and later tractors were often delivered with the revised markings that replaced the old numbering system entirely.

AD
Re: 8N MANUAL/ PART THREE, WHEELS, TIRES, BRAKES, & STEERING
Re: 8N MANUAL/ PART THREE, WHEELS, TIRES, BRAKES, & STEERING
Tractors Prices & Specs 2026
Tractors Prices & Specs 2026
1949 Ford 8N For Sale At Auction - Mecum Auctions
1949 Ford 8N For Sale At Auction - Mecum Auctions

Those numbers matter more than most owners realize. Because the 8N's PTO is driven through the transmission rather than by an independent clutch, the rolling circumference of the rear tires directly changes the speed of a brush hog, tiller, or spreader. Bolt on a set of tall 13.6-28 tires and your mower suddenly spins faster than the implement was designed for. Tire diameter also changes ground speed in each gear, hood angle, and how much clearance you have under the fenders.

Front Tire Fitment and Steering Effort

The standard front tire is a 4.00-19 in a 4-ply or 6-ply rating, usually with a three-rib or four-rib agricultural tread. Fronts on an 8N carry only a small fraction of the machine's roughly 2,400-pound operating weight, so they rarely wear out from load alone. What kills them is age, sun cracking, and running them half flat for years. A quality 4.00-19 with a fresh tube will typically run between $70 and $150 per tire depending on brand.

Flathead V8-Powered! An Upgraded 1950 Ford 8N Tractor
Flathead V8-Powered! An Upgraded 1950 Ford 8N Tractor
Kawasaki KZ650 Cafe Racer by Toby Jones
Kawasaki KZ650 Cafe Racer by Toby Jones
Funk / Ford 8N
Funk / Ford 8N

If you have added a loader or a front-end snow blade, you may want to step up to a wider 5.00-19 or convert to a 16-inch rim with a 6.00-16 tire for a bigger footprint and more load capacity. Just remember that the rim bolt pattern, offset, and hub spacing must match the 8N spindle assembly, and wider fronts make low-speed steering noticeably heavier when the tractor is sitting still. Many owners stay with the stock 4.00-19 specifically because it steers easily in tight barnyards.

Rear Tire Sizes and Modern Equivalents

The old three-number markings have been replaced by the current industry format, and the good news is that every original 8N rear size still has a direct modern counterpart. A 10-28 is now sold as an 11.2-28, an 11-28 is now a 12.4-28, and a 12-28 is now a 13.6-28. Physically they are the same tires with a different name stamped on the sidewall, so you can order with confidence from any modern dealer or online retailer.

AD

Rim width is the detail that trips people up. Mounting a tire on a rim that is too narrow pinches the sidewall, wears the tread unevenly, and can cause the bead to seat poorly. Going too wide spreads the tread flat and reduces bite in soft ground. Check the width stamped on your rims, or measure bead seat to bead seat, before you buy.

an old model tractor sitting in the grass
an old model tractor sitting in the grass
Ford 8N Backhoe Project
Ford 8N Backhoe Project
1948 Ford 8N Tractor with a Twin-Turbo Power Stroke V8
1948 Ford 8N Tractor with a Twin-Turbo Power Stroke V8
a monster truck with flames painted on it's front wheels and tires is parked in a driveway
a monster truck with flames painted on it's front wheels and tires is parked in a driveway
an old red and white tractor parked in the grass
an old red and white tractor parked in the grass
an old red and white tractor parked in the grass
an old red and white tractor parked in the grass
Original MarkingModern SizeRecommended Rim WidthApprox. Overall Diameter
10-28 (standard)11.2-2810 in~48 in
11-28 (optional)12.4-2811 in~49 in
12-28 (optional)13.6-2812 in~51 in
4.00-19 (front)4.00-193 in~31 in

Choosing the Right Tread Pattern for the Job

Tread pattern is the single biggest variable in how an 8N behaves on your ground. The R-1 agricultural bar tread that came on these tractors is built for loose dirt and mud, but it will chew ruts into a manicured lawn the first time you turn. Turf and industrial patterns sacrifice some bite in exchange for a gentler footprint, and ribbed fronts exist in several configurations that change steering feel and sidewall strength.

It also helps to remember what you are working with. An 8N makes roughly 23 PTO horsepower and weighs in around 2,400 pounds bare, so traction is limited far more by weight and tire footprint than by engine output. Deep-lug tires and a few hundred pounds of ballast will do more for a stubborn plow than any engine modification ever will.

AD

R-1 Agricultural Bar Tread

The classic R-1 bar tread uses long diagonal lugs that overlap at the center of the tread, which lets the tire clean itself as it rolls and gives strong forward bite in tilled soil, manure, and mud. Bar angle matters too: a steeper bar angle favors hard ground and road travel, while a shallower angle digs harder in soft conditions. For general farm chores, a standard R-1 in 11.2-28 or 12.4-28 is the safest all-around choice.

1952 Ford 8n Tractor & 6 Foot Side Sickle Bar Mower
1952 Ford 8n Tractor & 6 Foot Side Sickle Bar Mower
1949 Ford 8N For Sale At Auction - Mecum Auctions
1949 Ford 8N For Sale At Auction - Mecum Auctions
yes agric...
yes agric...
Ford 8N, 9N & 2N Tractors - Collecting, Restoring and Using the Ford 8N
Ford 8N, 9N & 2N Tractors - Collecting, Restoring and Using the Ford 8N

Popular options in this category include the Firestone Field & Road and Champion lines, Titan's agricultural lineup, BKT's TR-135, Carlisle Farm Specialist, Mitas, and Alliance. Budget imports can work fine for light use, but check the ply rating carefully, as some inexpensive tires are only 4-ply and flex heavily under load. Expect to pay roughly $200 to $450 per rear tire depending on brand, size, and ply rating.

Turf, Industrial, and Rib Front Options

If your 8N spends its life on a lawn, in a paddock, or mowing around landscaping, an R-3 turf tire in a wide, low-profile size will dramatically reduce marking and rutting. Industrial R-4 tread sits between turf and ag, with a heavier casing and a blockier pattern that resists punctures and holds up well under loader work. Both compromise traction in deep mud compared to a true bar tread.

AD

Front options follow the same logic. A three-rib F-1 front steers predictably in soil and is the traditional choice for a restoration. A multi-rib F-2 offers better flotation on turf. Mixing patterns front and rear is completely acceptable as long as diameters stay reasonably matched to the original design so the tractor sits level and the steering geometry stays correct.

Inflation Pressure, Tubes, and Ballasting

Tire pressure is free performance that most owners ignore. Overinflate a rear tire and the tread bars sit on their tips, the footprint shrinks, and the tire spins long before it needs to. Underinflate it and the sidewall flexes excessively, the tire can slip on the rim, and heat builds up until something fails. Getting this right takes five minutes with a good gauge and an eye on how the tread sits on the soil.

Tubes deserve a mention as well. Most 8N rims are six or seven decades old, and even ones that look decent often have pitted bead surfaces, pinholes at the valve stem, or porosity that lets air bleed through the metal. Running a tube is cheap insurance that also protects against slow leaks and keeps you from fighting the same tire every two weeks.

Setting Pressure for Field Versus Loader Work

As a starting point for fieldwork, most owners run rear tires around 12 to 14 psi and front tires around 28 to 32 psi, then adjust based on how the tire sits. Look at the footprint: you want the tread bars flat across the ground with the sidewall just beginning to bulge. If the center bars are carrying all the weight, let air out. If the sidewall is folding over, add air.

Loader work and road travel call for higher pressures, often 20 to 24 psi in the rear and up to the sidewall maximum in the front, because the front tires are carrying far more weight than they were designed for. Radial tires, where available in 11.2-28 and similar sizes, run at lower pressures with a longer, flatter footprint that delivers noticeably better traction, though they cost more and demand sound rims.

Ballasting with Liquid and Wheel Weights

Nothing improves traction on a light tractor faster than adding weight low and between the tires. Liquid ballast is the traditional approach: fill a rear tire to about 75 percent capacity with water plus a freeze protectant. An 11.2-28 holds roughly 25 to 30 gallons, which works out to about 250 to 330 pounds per tire with beet juice or washer fluid, and more if you use calcium chloride.

Calcium chloride is the cheapest and heaviest option at around 11 pounds per gallon, but it is corrosive and will destroy a rim from the inside out if it ever leaks, so it absolutely requires a tube. Beet juice, sold under names like Rim Guard, is non-corrosive, non-toxic, and about 30 percent heavier than water. Cast wheel weights bolted to the rear centers, typically 100 to 150 pounds each, let you fine-tune traction and remove weight easily when you do not need it. Just keep an eye on total load, since the 8N's final drive and axle bearings were never designed for the weight a modern utility tractor handles.

Before you place an order, measure your rims, check fender and loader clearance, and think honestly about how you actually use the tractor. A matched set of properly sized, correctly inflated, well-ballasted tires will make an 8N pull harder, steer easier, and look the part, whether it is working a garden plot on Saturday or parked on the show field on Sunday. Take the time to get the details right, and the old Ford will keep earning its keep for another generation.

AD