3D Print Dice Tray: The Ultimate STL Guide for Tabletop Gamers
A 3D print dice tray solves a problem every tabletop player knows too well: dice rolling off the table, scattering under furniture, and interrupting the flow of a good campaign. Whether you play Dungeons & Dragons, Warhammer, or a casual board game night, a dedicated rolling surface keeps your dice contained and your table tidy. Thanks to affordable desktop printers and a massive library of free models, building one yourself has never been more practical.
What makes this project appealing is how much control you have over the final result. You can size the tray to fit a cramped convention table, add compartments for miniatures and tokens, or print a collapsible version that slides into a backpack. This guide walks through the design decisions, material choices, and finishing tricks that separate a flimsy throwaway print from a tray you will still be using five years from now.
Why 3D Print a Dice Tray Instead of Buying One
Store-bought dice trays are usually made from folding leather, cheap MDF, or molded plastic, and each has tradeoffs. Leather folds flat but lacks rigid walls, so energetic rolls can still escape. Wooden trays look great but cost three or four times what a spool of filament does. A 3D printed tray gives you rigid geometry, exact dimensions, and the freedom to match your character sheet's color scheme, all for a couple of dollars in material.
There is also the repair and upgrade angle that retail products cannot match. If a corner cracks after a year of heavy use, you simply reprint that part. If you decide you want a deeper lip for oversized d20s, you open the file, adjust one parameter, and print a revised version the same evening. That kind of iteration is what keeps hobbyist printers busy long after the novelty of owning a machine wears off.
Cost, Customization, and Personal Expression
A typical dice tray uses between 60 and 150 grams of filament, which works out to roughly two to five dollars depending on the material. Compare that to fifteen to forty dollars for a comparable commercial tray, and the economics become obvious quickly. Even if you factor in electricity and a small amount of waste from failed prints, you are still well ahead after a single project.
Customization goes far beyond color. You can emboss your character's name, a faction crest, or a dice-runner's monogram directly into the base. You can size the interior to fit exactly twelve standard dice plus a rolling zone, or make an oversized arena for throwing handfuls of d6s in a Warhammer game. Many designers offer parametric files where you type in dimensions and the model regenerates automatically, so a perfect fit is only a few keystrokes away.
Materials and Durability Considerations
PLA is the default choice for most decorative prints, and it works fine for a dice tray that lives on a shelf between sessions. It prints easily, comes in every color imaginable, and produces crisp detail on lettering and logos. The weakness is heat: leaving a PLA tray in a hot car can cause it to soften and warp, so keep that in mind if you transport your gear in the summer.
PETG offers a better balance of toughness and heat resistance while remaining easy to print on most machines. For a tray that will be tossed into a bag repeatedly, PETG's slight flex helps it absorb impacts instead of cracking. PLA Plus filaments have narrowed the gap considerably, and TPU is worth considering for a thin bumper layer on the base if you want the tray to sit silently on a glass table.
Designing a Dice Tray That Actually Works
A good dice tray has to balance three things: interior depth, wall thickness, and overall footprint. Walls that are too low let dice escape during an aggressive roll. Walls that are too tall block your view of the results and make it awkward to scoop dice out. Most players find that a 15 to 25 mm interior wall height hits the sweet spot for standard polyhedral sets.
Footprint matters just as much as height. A 200 by 150 mm tray fits comfortably in front of a single player without crowding their character sheet, while a shared center-table tray might run 300 mm square or larger. Measure your actual play space before you commit to a model, because a beautiful tray that does not fit your table setup will end up in a drawer.
Key Features: Felt Lining, Compartments, and Dice Towers
Felt or fabric lining dramatically changes how a tray feels and sounds. Bare plastic produces a sharp clatter and lets dice skid across the surface, sometimes bouncing out over the rim. A thin lining absorbs energy, reduces noise, and keeps dice from sliding. Many printable designs include a recessed channel around the interior floor specifically sized for a 1 to 2 mm craft felt insert you cut yourself.
Compartments and integrated dice towers are the two most popular upgrades. A divided corner section holds a full set of seven dice so you are never digging through a bag mid-turn. A dice tower mounted over one end randomizes rolls while keeping everything contained, which is especially useful for players who want consistent, fair results without a rolling box in the middle of the table.
Where to Find Files and How to Modify Them
Free repositories like Printables, Thingiverse, and MakerWorld host thousands of dice tray models ranging from minimalist to absurdly ornate. Search terms like "dice tray," "rolling tray insert," and "dice tower tray" will surface the most relevant results. Pay attention to print profiles and photos in the comments, since community feedback often reveals fit issues that the thumbnail does not show.
If you want to modify an existing model, free tools like Tinkercad handle simple changes such as adding text or resizing walls. Blender and Fusion 360 give you full control for more ambitious edits, including adding magnet pockets, hinged lids, or modular wall segments. Learning even basic CAD pays off fast, because once you understand the workflow, every future tray becomes a ten-minute tweak rather than a fresh search.
Printing, Finishing, and Getting a Professional Result
Slicer settings determine whether your tray looks handmade or store-bought. A 0.2 mm layer height is a reasonable default, but dropping to 0.12 mm on the top surfaces makes embossed lettering noticeably crisper. Three perimeters and 15 to 20 percent infill provide more than enough rigidity for a tray that will only ever hold lightweight plastic dice.
Orientation is the other major decision. Printing a tray flat on its base gives the cleanest interior floor and the strongest layer adhesion, but it requires supports if the design has overhanging decorative elements. Printing it upside down can eliminate supports entirely at the cost of a rougher interior surface, which matters less if you plan to cover it with felt anyway.
Slicer Settings and Structural Choices Worth Tweaking
Consider adding a chamfer or fillet to the top rim if the model does not already include one. Sharp 90-degree edges are uncomfortable against the wrist during long sessions and are more prone to chipping. Most slicers cannot add geometry automatically, but many model files include optional rim variants you can swap in before slicing.
If your tray will be used heavily, bumping walls to four perimeters adds meaningful strength for very little extra material. Ironing the top surface is another cheap trick that produces a glassy, almost injection-molded finish on the flat rim. Enable it only on the topmost layer, since ironing every layer wastes time without visible benefit.
Felt Lining, Painting, and Post-Processing
Cutting felt to fit is easier than it sounds. Lay the tray on a sheet of self-adhesive felt, trace the interior outline with a fine marker, and cut slightly inside your line so the fabric tucks under the rim. Peel and stick, then press firmly from the center outward to avoid bubbles. A rolling pin or a smooth bottle works well for this step.
For unpainted prints, a light sanding with 400-grit paper followed by a matte clear coat hides layer lines and gives the plastic a more premium feel. If you want painted detail on raised logos, prime the whole tray, brush acrylic into the recesses, then wipe the high points clean before sealing. Acrylics adhere well to PLA and PETG as long as you do not handle the tray roughly for the first day.
The best part about this hobby is that your first tray is rarely your last. Print one, play a few sessions with it, and you will immediately notice what you want to change, whether that is a deeper well, a lighter design for travel, or a magnetic lid that snaps shut. Fire up your slicer, grab a spool in your favorite color, and see what ends up on your table next weekend.