2017 subaru crosstrek oil life reset

How to Reset Oil Life on a 2017 Subaru Crosstrek (Easy Steps)

By Amanda Thompson
AD

If the oil change reminder on your 2017 Subaru Crosstrek has popped up and stayed on, you are probably looking for a quick way to clear it. The good news is that the 2017 Subaru Crosstrek oil life reset is a simple procedure you can usually complete in your driveway with just a few button presses. It does not require a scan tool, and you do not have to visit a dealership just to turn off the maintenance message.

What trips up many owners is that the 2017 Crosstrek was offered with different instrument cluster and display configurations, so the reset method can vary slightly by trim. Some models use the trip knob on the gauge cluster, while others rely on the steering-wheel i/SET button and the multi-function display. The guide below walks through both approaches, explains what the reminder actually means, and covers what to do if the light refuses to go away.

Understanding the 2017 Subaru Crosstrek Oil Change Reminder

The oil change reminder in a 2017 Crosstrek is not an advanced oil-quality sensor that analyzes the condition of your engine oil in real time. Instead, it is a maintenance reminder that counts down based on mileage and time since the last reset. When the preset interval is reached, the display or light comes on to prompt you to schedule an oil and filter change.

AD
Easy Guide to Identifying Subaru Crosstrek Transmission Fluid Type - Take Your Oil
Easy Guide to Identifying Subaru Crosstrek Transmission Fluid Type - Take Your Oil
The most efficient Crosstrek ever? Subaru’s hybrid gets a bit rugged.
The most efficient Crosstrek ever? Subaru’s hybrid gets a bit rugged.
IAG Performance Air Oil Separator for Subaru Outback XT (20-26) Wilderness (22-26) Black / Red / Neon Yellow IAG-ENG-7191, Black
IAG Performance Air Oil Separator for Subaru Outback XT (20-26) Wilderness (22-26) Black / Red / Neon Yellow IAG-ENG-7191, Black

Subaru’s normal maintenance schedule for this generation often calls for an oil change around 7,500 miles or 7.5 months, whichever comes first, though severe driving conditions can shorten that interval. Because the reminder is tied to a preset schedule, it will not know whether you used full synthetic oil, how dusty the roads are, or whether you have been making mostly short trips. That is why resetting it only makes sense after the oil has actually been changed.

What Triggers the Oil Change Light

The light typically triggers once the vehicle reaches a programmed distance or time interval since the last reset. On many 2017 Crosstrek models, that reminder appears in the instrument cluster display as an oil maintenance message, often along with a chime or a small icon. If the battery was recently disconnected or the vehicle lost power, the reminder may also appear unexpectedly because the maintenance data was interrupted.

Subaru Legacy Key Replacement - What To Do, Options, Costs & More
Subaru Legacy Key Replacement - What To Do, Options, Costs & More
Subaru Crosstrek Fan Belt Cover Mod
Subaru Crosstrek Fan Belt Cover Mod
Best Off-road Mods for a Subaru Crosstrek
Best Off-road Mods for a Subaru Crosstrek

It is important to distinguish the oil change reminder from the red oil pressure warning light. The oil change reminder is a maintenance prompt, while the red oil can symbol indicates low oil pressure and should never be ignored. If you see the red oil pressure light, stop the engine safely and check the oil level immediately. Resetting the maintenance reminder will not fix an oil pressure problem.

Why Resetting It Matters

Resetting the reminder after an oil change keeps your maintenance tracking accurate. If you change the oil but leave the light on, you lose the benefit of having a built-in reminder for the next interval. That can lead to skipped oil changes, which is especially risky on a Subaru boxer engine that relies on clean, correct-viscosity oil for proper lubrication and timing chain life.

AD

Keeping the reminder synced with your actual service history also helps when you sell the vehicle or hand it off to another driver. A clear maintenance display shows that you have been paying attention to routine service. If you keep a written log or digital record of oil changes, resetting the light is the final step that ties everything together.

Subaru Products
Subaru Products
Top 5 Hidden Subaru Settings: Subaru Forester, Outback, Crosstrek
Top 5 Hidden Subaru Settings: Subaru Forester, Outback, Crosstrek
8 Hidden Subaru Features You Didn't Know About Your Subaru!
8 Hidden Subaru Features You Didn't Know About Your Subaru!
Subaru Cruise Controls Explained
Subaru Cruise Controls Explained
5 Surprising Things On Your Subaru You Never Knew Existed!
5 Surprising Things On Your Subaru You Never Knew Existed!
2019 Subaru Ascent
2019 Subaru Ascent

How to Reset Oil Life on a 2017 Subaru Crosstrek

Before you begin, park the Crosstrek on a level surface, set the parking brake, and make sure the engine is off. You will need the key or key fob with you, and you will need to turn the ignition to the ON position without starting the engine. On push-button models, press the start button twice without pressing the brake pedal. On keyed models, turn the key to ON but do not crank the starter.

Try the method that matches your display. If your Crosstrek has a small trip display in the gauge cluster, start with the trip knob procedure. If it has a larger multi-function information display with steering-wheel controls, use the i/SET method. You can also try the other method if the first one does not work, since trim levels and build dates can vary.

AD

Method 1: Trip Knob Reset for Most 2017 Crosstrek Models

Locate the trip knob on the right side of the instrument cluster, near the speedometer or tachometer. With the ignition in ON, press the knob repeatedly until the odometer display shows the oil maintenance message, often labeled OIL or OIL CHANGE. Once that screen is visible, press and hold the trip knob for about 5 to 10 seconds.

ad eBay | $112.39 | Used Brake Master Cylinder fits: 2019 Subaru Xv crosstrek AT CVT Grade A | Parts
ad eBay | $112.39 | Used Brake Master Cylinder fits: 2019 Subaru Xv crosstrek AT CVT Grade A | Parts
Top 5 Settings you will want to change on your NEW Subaru Outback, Forester, Crosstrek & More
Top 5 Settings you will want to change on your NEW Subaru Outback, Forester, Crosstrek & More
the engine compartment is shown with an arrow pointing to it's location in the car
the engine compartment is shown with an arrow pointing to it's location in the car

After a few seconds, the display may begin flashing or change to a reset confirmation. If holding the knob alone does not clear it, release the knob and press it once more within a few seconds to confirm the reset. When the procedure is successful, the oil reminder should disappear or reset to a new interval. Turn the ignition off and back on to verify that the message is gone.

Method 2: Steering Wheel i/SET Reset for Models with Multi-Function Display

On 2017 Crosstrek models with the multi-function display, turn the ignition to ON and use the up and down arrows on the steering wheel to scroll through the menu. Look for a Settings, Maintenance, or Vehicle Settings menu. Select the oil change or engine oil option, then press and hold the i/SET button until the display asks you to confirm or shows that the reset is complete.

AD

Some models may require you to select Reset and then press i/SET once more to confirm. If your Crosstrek has a touchscreen infotainment system, the maintenance reset may also be available through the vehicle settings menu on the screen. After confirming the reset, exit the menu and cycle the ignition to make sure the reminder does not return immediately.

Troubleshooting and Maintenance Tips After the Reset

If the oil reminder will not reset, do not assume the system is broken. In many cases, the issue is simply that the ignition was not in the correct mode, the wrong button was held, or the vehicle was not fully in Park. It also helps to close all doors and make sure the key fob is inside the cabin, since some display menus behave differently when the vehicle is not fully awake.

Another common mistake is trying to reset the oil level warning instead of the oil change reminder. The 2017 Crosstrek may display both an oil maintenance message and a separate oil level check. The maintenance reminder is the one tied to distance and time, while the oil level warning is tied to the sensor in the oil pan. Make sure you are on the correct screen before holding any buttons.

What If the Oil Light Won’t Reset?

If the trip knob method does not work, try the steering-wheel i/SET method, and vice versa. Hold the button longer than you think is necessary, sometimes 10 to 15 seconds, because a quick press is often interpreted as a menu selection rather than a reset command. You can also check the owner’s manual for your exact trim level, since Subaru changed display menus slightly across model years and packages.

If neither method works, a weak battery or a recent electrical interruption may be preventing the display from accepting the reset. In that case, drive the vehicle for a few minutes, turn it off, and try again. If the reminder still refuses to clear, a Subaru dealer or a qualified shop can reset it with a scan tool. Avoid disconnecting the battery as a shortcut, since that can clear radio presets and other learned settings.

After Reset: Maintenance Tips for Your Crosstrek

The 2017 Crosstrek with the 2.0-liter engine generally uses 0W-20 full synthetic oil, and the capacity is around 5.1 US quarts with a filter change. Always use the oil grade and specification listed in your owner’s manual, and replace the oil filter at the same time. If you drive in dusty conditions, make frequent short trips, tow a trailer, or spend a lot of time in stop-and-go traffic, follow the severe maintenance schedule instead of the normal one.

Check the oil level at least once a month and top off only with the correct oil if it is low. Keep receipts for oil and filters, and note the mileage at each change. The oil change reminder is a helpful tool, but it is not a substitute for checking the dipstick and paying attention to how the engine runs. A well-maintained Crosstrek will reward you with better reliability and fewer surprises down the road.

With the reminder cleared, you can get back to enjoying your Crosstrek without that persistent maintenance message staring back at you. Keep an eye on the mileage, use the correct 0W-20 synthetic oil, and reset the light only after the oil and filter have actually been changed. If you would rather not deal with the menus yourself, your local Subaru service center can handle the reset during your next oil change and keep your maintenance records up to date.

AD