2017 Kia Sedona Passenger Side Mirror Replacement
Need to replace the passenger side mirror on your 2017 Kia Sedona? You're not alone. Mirrors, despite their durability, can crack, shatter, or become damaged over time. But don't worry, replacing it isn't as complicated as it sounds. This guide will walk you through the process step by step, ensuring you get it right the first time.
Before we dive in, make sure you have the following tools and materials ready: a replacement mirror (ensure it's compatible with your vehicle model), a screwdriver, a socket wrench, and a ratchet. Safety first, so wear gloves and protective glasses. Let's get started!
Removing the Old Mirror
The first step is to remove the old mirror safely and efficiently. Here's how:



1. **Disconnect the electrical connector**: Start by lifting the mirror up slightly and locate the electrical connector at the base of the mirror. Pull it out gently but firmly. This disconnects the electrical supply to the mirror.
Detaching the Mirror from the Base
2. **Remove the mirror adjustment knob**: Use a screwdriver to remove the adjustment knob. It's usually secured with a Phillips or flathead screw.



3. **Remove the mirror base**: Now, use a ratchet and socket wrench to remove the bolts securing the mirror base to the vehicle. Typically, these are two bolts on most vehicles. Once loosened, gently pull the mirror out. If it doesn't come out easily, give it a slight wiggle or tap with your fingers to loosen it.
Installing the New Mirror
Now that the old mirror is out, let's install the new one. Here's how:
1. **Prepare the new mirror**: Ensure the new mirror is compatible with your vehicle. If it's an auto-dim or heating mirror, ensure the internal components match your current mirror. Check the packaging for any protective covers; if present, leave them on until installation is complete.



Securing the New Mirror
2. **Attach the mirror base**: Position the new mirror base into the hole where the old mirror was. Use the socket wrench and ratchet to reinstall the bolts, tightening them securely but not overtightening. A general rule is to tighten them to the point where they're snug but can still be turned slightly by hand.
3. **Reattach the electrical connector**: Connect the new mirror's electrical connector to the vehicle's corresponding connector. Slide the mirror up into place, ensuring a secure fit.
Adjusting and Finishing Up
4. **Reattach the mirror adjustment knob**: Reinstall the adjustment knob using the same screw you removed earlier. Tighten it securely.
5. **Test the mirror**: Before you consider the job done, test the mirror by adjusting it and ensuring it works correctly. If it's an auto-dim or heated mirror, make sure those features work as well.
Congratulations, you've successfully replaced the passenger side mirror on your 2017 Kia Sedona! Regularly check your mirror, especially after any incidents or accidental impacts, to ensure its safety and functionality. Happy driving!




