20' Laminated Beam: The Ultimate Guide to Strength, Uses, and Installation
A 20' laminated beam is an engineered wood product built to carry heavy structural loads across a 20-foot span. Instead of relying on a single tree, manufacturers glue together layers of lumber or veneers under intense pressure, creating a beam that is stronger, straighter, and more predictable than traditional solid sawn timber. For builders, remodelers, and homeowners, a 20-foot laminated beam can open up a floor plan, support a ridge line, or replace a load-bearing wall with fewer posts and a cleaner look.
The 20-foot length is a practical sweet spot in residential and light commercial construction. It is long enough to span a two-car garage, a wide basement, or an open living area, yet short enough to ship on a standard flatbed and maneuver into most job sites. The key is choosing the right laminated beam type, size, and grade for the load, because a 20' laminated beam is not a one-size-fits-all commodity.
What Makes a 20' Laminated Beam Different?
Laminated beams fall into two broad families: laminated veneer lumber (LVL) and glued laminated timber (glulam). LVL is made from thin wood veneers glued together, which gives it high strength and consistent stiffness. Glulam is made from thicker lumber laminations, often visible on the face, and is frequently used for longer spans and architectural exposures. Both are engineered, but they behave differently under load, moisture, and fire conditions.
A 20-foot beam also changes the engineering conversation. As span increases, deflection, bending stress, and bearing requirements grow quickly. A beam that works at 12 feet may fail at 20 feet, even if the depth looks similar. That is why a 20' laminated beam should always be selected from manufacturer load tables or specified by a structural engineer, not guessed from appearance.
Common Types of 20-Foot Laminated Beams
LVL beams are the most common choice for residential headers, floor beams, and garage door spans. They are typically available in depths from 9.5 inches to 24 inches and widths of 1.75 inches, 3.5 inches, or wider when built up. A 20-foot LVL beam can often be ordered as a single piece or as multiple plies nailed together on site, depending on the load and supplier.
Glulam beams offer a warm, exposed-wood look and are common in post-and-beam homes, churches, pavilions, and commercial spaces. Standard glulam widths start around 3.125 inches and increase in increments, while depths can exceed 24 inches. For a 20-foot span, glulam is often chosen when appearance matters or when the beam must carry heavy roof loads over a wide open area.
Sizes, Grades, and Load Capacity
A 20' laminated beam might be sold as 1.75" x 11.875", 3.5" x 14", 5.25" x 16", or many other combinations. The first number is width or thickness, and the second is depth. Depth is the biggest driver of stiffness, so a deeper beam usually spans farther than a shallow one. However, wider beams help with lateral stability and can reduce the number of plies needed in a built-up assembly.
Load capacity depends on more than dimensions. You must account for live load, dead load, snow load, roof pitch, floor finish, tributary width, and deflection limits such as L/360 or L/240. A 20-foot laminated beam carrying a roof with heavy snow will need a different size than the same beam carrying a lightly loaded interior floor. Always match the beam stamp and manufacturer's span table to the actual project conditions.
Where 20' Laminated Beams Are Used
Twenty-foot laminated beams show up in open-concept renovations, garage conversions, basement remodels, and room additions. They are also common in decks, porches, and outbuilding structures where a long, unobstructed span is needed. In many cases, the beam replaces a load-bearing wall or a series of posts, creating a more usable interior and a more modern layout.
Commercial and agricultural buildings use 20-foot laminated beams for mezzanines, equipment supports, and roof purlins. Because engineered beams are dimensionally stable, they resist the twisting, shrinking, and warping that can plague solid lumber. That stability makes them easier to finish, frame, and inspect, especially when the beam will remain exposed.
Design and Installation Considerations
Before installation, confirm the beam's bearing length. A 20' laminated beam typically needs at least 3.5 inches of bearing at each end, though some manufacturers require more for high loads. The supporting posts, walls, or headers must be sized to carry the concentrated load. If the beam sits in a pocket or on a ledger, use approved hangers, straps, and fasteners to prevent rotation and uplift.
Moisture control is another critical factor. Laminated beams should not be stored in standing water or installed while wet. Keep them covered on site, allow airflow, and maintain proper clearance from concrete or soil. If the beam is exposed to weather, use a rated exterior adhesive and finish system. For interior beams, avoid embedding them in damp masonry without a capillary break and proper detailing.
Cost, Sourcing, and Professional Support
The price of a 20' laminated beam varies widely by type, size, grade, region, and market conditions. LVL beams are often priced per linear foot or per piece, while glulam beams may be quoted by board foot or by custom fabrication. Longer lengths, custom widths, architectural grades, and delivery fees can increase the total. It is smart to request quotes from at least two engineered wood suppliers.
Most lumber yards do not stock every 20-foot laminated beam size. Special orders may take one to three weeks, and custom glulam can take longer. Provide the supplier with the span, load, deflection limit, bearing details, and whether the beam will be exposed. A structural engineer or experienced contractor can translate those requirements into a stamped specification and confirm that the selected beam meets code.
Choosing a 20' laminated beam is really a decision about how you want the space above and below it to perform for decades. Start with an accurate load plan, verify the manufacturer's span tables, and let a qualified professional review the connections and supports before you order. With the right beam and detailing, a 20-foot span can become the quiet structural backbone of a brighter, more open building.