2 Grommet Guide: Sizes, Uses, and Best Picks for DIY Projects
A "2" grommet can mean different things depending on the supplier, the product listing, and the project at hand. It might refer to a grommet with a two-inch inside diameter, a size #2 grommet in a manufacturer's catalog, or simply a pack that contains two grommets. That ambiguity is why buyers often need to check the actual dimensions and specifications before ordering.
For anyone working with tarps, curtains, banners, marine covers, or heavy fabrics, getting the size right matters. A "2" grommet that is too small may not accept the intended rope or cable, while one that is too large can weaken the surrounding material or look out of proportion. This guide breaks down the common meanings, materials, and installation considerations so you can choose with confidence.
Understanding the "2" Grommet Measurement and Naming
In hardware and textile supplies, grommet sizes are rarely as simple as a single number. The term "2" grommet may appear in product titles, bins, or invoices, and its meaning depends on whether the seller is using trade size, inside diameter, outside diameter, or pack quantity. A two-inch grommet is a large piece of hardware, while a #2 grommet may be much smaller and intended for light-duty fabric.
Before you buy, look for a technical drawing or specification table. Reputable suppliers list the inside diameter, outside diameter, flange height, barrel length, and recommended fabric thickness. Those numbers tell you more than the shorthand label, especially when you are comparing a "2" grommet from one brand with a similarly named product from another.
Two-Inch Inside Diameter vs. Outside Diameter
When most people search for a 2-inch grommet, they mean an inside diameter of roughly two inches. That opening is large enough for thick rope, wire rope, tubing, or heavy-duty cables used in shade sails, truck tarps, and industrial curtains. The outside diameter will be larger, often three to four inches across, because the metal flange must grip the fabric securely.
If you only measure the outer rim, you may accidentally order a grommet with a much smaller opening. For example, a product with a four-inch outside diameter might have a two-inch inside diameter, but a product labeled 2 inch by outside diameter may have an opening closer to one inch. Always confirm which measurement the listing uses.
Size #2 and Two-Piece Grommet Kits
In some catalogs, #2 grommet refers to a numbering system rather than inches. These size numbers vary by manufacturer and are often tied to the barrel diameter and metal thickness. A #2 grommet might be used for lightweight canvas, curtains, or craft projects, and it may have an opening far smaller than two inches.
Separately, a 2 grommet listing can simply mean a pack of two grommets. This is common in repair kits, sample packs, and small craft supplies. If the quantity is the main descriptor, the actual size will be listed elsewhere, such as 3/8 inch, 1/2 inch, or 1 inch. Reading the full product details prevents a frustrating mismatch.
Choosing and Installing a "2" Grommet
Once you know which type of "2" grommet you need, the next step is matching it to the material and load. A large two-inch grommet needs reinforced fabric, a sturdy setting tool, and enough spacing to distribute stress. A small #2 or two-pack grommet may only need a simple hand tool and a few minutes of work.
Installation is not complicated, but it is unforgiving. The hole must be cut cleanly, the grommet must sit flat, and the washer must be compressed evenly. Rushing the process can crush the fabric, crack the finish, or create a loose eyelet that pulls out under tension.
Materials, Durability, and Load Ratings
Brass grommets are popular because they resist corrosion, look attractive, and hold well in canvas and marine environments. Stainless steel offers greater strength and rust resistance for outdoor tarps and shade sails, while nickel-plated steel provides a shiny finish at a lower cost. Plastic grommets are lightweight and inexpensive, but they are best for light indoor use.
For a two-inch grommet, metal thickness and flange width matter as much as the material name. A thicker flange spreads the load across more fabric, and a longer barrel accommodates bulky hems or multiple layers. If the grommet will be exposed to saltwater, constant sun, or heavy wind, choose stainless steel or marine-grade brass and inspect it periodically.
Installation Tips for Clean, Secure Results
Start by marking the grommet positions evenly. For tarps and curtains, space grommets every 12 to 24 inches, with extra grommets at corners and high-stress points. Place a reinforcing patch, webbing, or fusible interfacing behind each location so the fabric does not tear away from the metal.
Use the correct hole cutter or punch for the grommet's barrel size. The hole should be snug, not loose. Insert the grommet from the front, place the washer on the back, and set it with a grommet press or a setting tool and hammer. Work on a solid surface, apply firm even pressure, and check that the washer is fully seated without cutting into the fabric.
Whether your project calls for a true two-inch grommet, a size #2 fastener, or a two-pack of small eyelets, the key is to verify the dimensions before you cut or order. Measure the opening you need, match the grommet to the fabric and environment, and invest in the right setting tool for the job. With the correct hardware and a careful install, your tarp, curtain, or cover will stay secure through wind, weather, and repeated use.