120mm fan template

120mm Fan Template: Easy DIY Cutout Guide for PC Cooling Fans

By Michael Thomas
AD

A 120mm fan template is one of the most practical tools you can keep in a PC modding kit, whether you are cutting a new intake vent, adding a radiator mount, or replacing a failing case fan with a standard aftermarket model. It gives you a reliable guide for the square frame, the circular opening, and the four mounting holes, so you do not have to guess where to drill or cut. For anyone working with metal, acrylic, wood, or 3D printed parts, the difference between a clean install and a crooked fan often comes down to using the right template.

Unlike a simple ruler or eyeballed measurement, a dedicated 120mm fan template translates real fan dimensions into a repeatable pattern. That matters because a fan that sits slightly off-center can vibrate, rub against a grill, or leave screw holes too close to the edge of a panel. A good template removes that uncertainty and helps you work faster, especially when you are modifying a case that was never designed for the fan layout you want.

What Is a 120mm Fan Template and Why It Matters

A 120mm fan template is a physical or digital guide that represents the mounting footprint of a standard 120mm cooling fan. It typically shows the outer 120mm square, the central circular cutout, and the four screw holes positioned in a square pattern. You can place a physical template directly on a panel, trace around it, or use it as a drill guide. Digital versions serve the same purpose in CAD, laser cutting, or CNC software.

AD
120mm Fan Template
120mm Fan Template
an image of a fan with the words 10 fun templates
an image of a fan with the words 10 fun templates
Printable Fan Templates
Printable Fan Templates

The importance of a template becomes obvious the moment you need to cut into a expensive case panel or a custom acrylic sheet. A small measurement error can mean a fan that does not align with a radiator, a grill that sits crooked, or screw holes that strip out because they are too close to the opening. A 120mm fan template reduces those risks by giving you a verified layout before any material is removed.

Standard 120mm Fan Dimensions and Mounting Hole Spacing

Most 120mm fans follow a widely used standard: a 120mm by 120mm frame, usually 25mm thick, with four mounting holes spaced 105mm apart on center. The holes are typically designed for M4 or 6-32 screws, and the through-hole diameter is commonly between 4.3mm and 4.5mm. The actual blade opening is often slightly smaller than the frame, usually around 115mm to 118mm, depending on the fan model and frame design.

Fan
Fan
Petal Fan Template, Fan Template, Wedding Fan Template, Church Fan Template, Grad Fan Template, Fan Template Canva, Paddle Fan Template
Petal Fan Template, Fan Template, Wedding Fan Template, Church Fan Template, Grad Fan Template, Fan Template Canva, Paddle Fan Template
Fan Mesh Guard - Tri-spoke v2 - 120mm
Fan Mesh Guard - Tri-spoke v2 - 120mm

Those dimensions are the foundation of any reliable 120mm fan template. The 105mm hole spacing is the critical measurement because it determines whether the fan, radiator, grill, and filter all line up. Some thick fans, such as 38mm models, use the same mounting pattern, but they may require longer screws or additional clearance behind the panel. Always verify the fan thickness and screw length before finalizing a cutout.

Types of 120mm Fan Templates: Printable, Physical, and Digital

Printable templates are usually PDF or SVG files that you print at 100 percent scale and tape to the work surface. They are inexpensive, easy to replace, and accurate enough for one-off projects. Physical templates made from acrylic, MDF, or aluminum are more durable and can include hardened drill bushings for repeated use. Digital templates, including DXF, STL, and SVG files, are used with laser cutters, CNC machines, and 3D printers.

AD

Each format has a place. Printable templates are ideal for a quick case mod or a single fan hole. Physical templates shine in small production runs or when you need to drill many identical holes. Digital templates offer the most flexibility because you can adjust the opening size, add cable pass-throughs, or integrate a custom grill pattern. For complex builds, starting with a digital 120mm fan template and then exporting it for manufacturing is often the most efficient path.

120mm Fan - Free CAD Drawings
120mm Fan - Free CAD Drawings
120mm Fan Enclosure Laser Cut File: Vent Cover Template (SVG DXF)
120mm Fan Enclosure Laser Cut File: Vent Cover Template (SVG DXF)
two scalloped shapes are shown in the shape of an envelope
two scalloped shapes are shown in the shape of an envelope
a paper cut out of an umbrella on a white surface
a paper cut out of an umbrella on a white surface
Modeling a fan blade | 12CAD.com
Modeling a fan blade | 12CAD.com
Multipurpose 3D Printed 140mm Fan for the Kitchen
Multipurpose 3D Printed 140mm Fan for the Kitchen

How to Use a 120mm Fan Template for Cutting and Mounting

Before you cut or drill, prepare the surface and confirm that your template is printed or machined to the correct scale. Clean the panel, remove any dust or oil, and apply painter's tape if you want to reduce scratches. Mark the center point of the fan location and align the template's centerlines with your reference marks. If you are using a paper template, tape all four edges so it cannot shift during drilling.

Secure the template with clamps when possible, especially if you are working with acrylic or metal. A moving template is one of the most common causes of misaligned holes. For metal panels, use a center punch to create a small dimple at each screw hole. For acrylic, use an awl or a spring-loaded punch with light pressure to avoid cracking. Once the template is locked in place, you are ready to drill and cut.

AD

Step-by-Step Cutting and Drilling Guide

Start by drilling pilot holes at the four mounting points using a 3mm to 4mm bit. Then, if you need a large opening, use a hole saw that matches your desired cutout. A 114mm or 115mm hole saw is common for 120mm fans because it leaves a small lip for the fan frame to sit against. If you use a 120mm hole saw, check that the fan frame still has enough material to support the screws. For square openings, drill corner relief holes and use a jigsaw with a fine-tooth metal blade.

a drawing of a propeller on a white sheet with lines in the middle and bottom
a drawing of a propeller on a white sheet with lines in the middle and bottom
a blank piece of paper with scalloped edges on a white background is shown
a blank piece of paper with scalloped edges on a white background is shown
New Thermalright Fan: TY-150
New Thermalright Fan: TY-150
PC Fan Radiator AIO Spacer, 120 140 240 280 360 420mm Rad x 120/140mm Fan, Cowl, Shroud, Adapter
PC Fan Radiator AIO Spacer, 120 140 240 280 360 420mm Rad x 120/140mm Fan, Cowl, Shroud, Adapter

After cutting, deburr all edges with a file or deburring tool. Test-fit the fan before enlarging any holes. If the screw holes are slightly tight, open them to 4.5mm. If you are using self-tapping screws into plastic, drill a smaller pilot hole instead. Add rubber washers or silicone grommets between the fan and the panel to reduce vibration. Always check that the fan blades spin freely and do not contact the cut edge or any grill.

Mounting Radiators, Grills, and Dust Filters

Radiators for 120mm fans use the same 105mm mounting spacing, but they add another layer of complexity. Use your 120mm fan template to mark both the fan and radiator holes, then confirm the screw length so it does not puncture the radiator core. Many radiator screws are 30mm or 35mm long, but thick fans and shrouds can change the required length. A template helps you keep the fan, radiator, and case panel aligned as a single assembly.

AD

Grills and dust filters also benefit from a precise template. A typical stack might include a grill on the outside, the fan on the inside, and a filter between them. The template ensures that all four screw holes pass through every layer without binding. For magnetic filters, cut the opening slightly larger than the blade area so the filter frame can sit flat. If you are mounting a filter on the intake side, leave enough clearance for the fan hub and blades.

Designing and Customizing Your Own 120mm Fan Template

Creating your own 120mm fan template gives you control over the opening size, hole placement, and extra features. You might want a template for a recessed fan mount, an offset radiator position, or a decorative grill that matches your build's theme. CAD software such as Fusion 360, FreeCAD, LibreCAD, or Inkscape can all produce accurate templates. The key is to start with the standard dimensions and then add only the modifications your project requires.

Begin with a 120mm square and a center point. Place the four screw holes at plus and minus 52.5mm from the center in both the X and Y directions, which creates the 105mm spacing. Draw a central circle for the blade opening, usually between 114mm and 118mm depending on the fan. Add tolerances for the material you are cutting, and remember that laser cutting, CNC routing, and 3D printing all have slightly different kerf and shrinkage characteristics.

Digital Design Tips for Accurate Hole Spacing

Use constraints and explicit dimensions instead of dragging lines by eye. Most CAD programs let you lock the center point, set the hole spacing to 105mm, and verify the diagonal distance between opposite holes. That diagonal should be about 148.5mm, which is a useful double-check. If your design does not match that number, one of your axes is off. Keep the screw holes perpendicular to the surface and avoid placing them too close to the cutout edge.

When you export your 120mm fan template, choose the right format for the machine. DXF and SVG are common for laser cutting and CNC, while STL is used for 3D printing. Add a note or a small engraving that indicates the top and front orientation, because a symmetrical template can be rotated accidentally. If the template will be used as a drill guide, consider adding removable center marks or pilot dimples to make alignment faster.

3D Printing and Laser Cutting Considerations

For 3D printed templates, use at least four perimeters and a moderate infill such as 40 percent to keep the guide rigid. PLA and PETG work well for general use, while ABS or ASA may be better for warmer environments. If the template will guide drill bits repeatedly, design separate holes for hardened bushings or use a metal insert. Print a test piece first to check hole diameter, because many printers produce holes slightly smaller than the digital model.

Laser cutting is excellent for acrylic, plywood, and MDF templates. Use vector lines for the cut paths and set the kerf compensation so the final part matches your dimensions. A 3mm to 5mm acrylic template is stiff enough for most panel work, but thicker material may be needed for large cutouts. For CNC machining, clamp the material securely and use a carbide bit designed for the material. If you plan to use the template many times, aluminum or steel will far outlast wood or plastic.

Avoiding Common Mistakes and Ensuring Compatibility

One of the most common mistakes is printing a template without checking the scale. A template that is scaled to fit a page can be off by several millimeters, which is enough to ruin a fan mount. Always print at 100 percent and measure the hole spacing before you cut. Another frequent error is using the wrong drill bit size; too large and the screws will not hold, too small and you risk cracking the panel or stripping the screw head.

Compatibility is another area where a good 120mm fan template helps. Most aftermarket fans follow the standard 105mm spacing, but some OEM fans from prebuilt systems use different mounting patterns. Radiators may also have specific screw length requirements, and thick fans can interfere with motherboard components or cable routing. Check the fan's airflow direction arrow and the radiator's inlet and outlet positions before you commit to a final layout.

Screw Hole Alignment and Clearance Issues

If your screw holes are not perfectly aligned, the fan will not sit flat, and tightening the screws can warp the frame or crack acrylic. Use a drill guide or a drill press when possible. For hand drilling, start with a small pilot hole and check alignment before enlarging. Countersink the holes if the screw heads sit above the surface and interfere with a grill or filter. A slightly oversized hole with a washer is often better than a hole that is too tight and forces the fan out of position.

Clearance matters on both sides of the panel. On the intake side, make sure the fan blades have enough room and are not blocked by a filter frame. On the exhaust side, check that the fan hub does not hit a radiator fin or a cable. If you are mounting a fan in a tight space, a slim 120mm fan may be a better choice than a standard 25mm model. The template should reflect the actual fan thickness, not just the mounting hole pattern.

Fan Thickness, Airflow, and Vibration Considerations

Standard 120mm fans are 25mm thick, but high-static-pressure models and some industrial fans can be 38mm thick. If you are recessing the fan into a panel, your template needs to account for that extra depth. Airflow direction is equally important: most fans have arrows on the frame showing blade rotation and air direction. Mounting a fan backward will still move air, but it may fight your intended pressure balance or push hot air back into the case.

Vibration is a quiet killer of fan performance. Hard-mounting a fan directly to a thin metal panel can create a low hum or rattle that is difficult to eliminate later. Use rubber grommets, silicone mounts, or a thin foam gasket between the fan and the panel. Your 120mm fan template can include outlines for these pads, which makes it easier to cut matching gaskets. A little attention to vibration now will make the finished build much quieter.

Keep a reliable 120mm fan template with your modding tools, and you will be ready for the next cooling upgrade without starting from scratch. Whether you print a fresh paper guide, machine an acrylic template, or save a digital file for your laser cutter, the payoff is the same: cleaner cuts, straighter fans, and fewer wasted panels. Take a few minutes to verify the dimensions and test-fit your components, and your next fan mount will look like it came from the factory that way.

AD