1 5/8 unistrut

1 5/8 Unistrut: The Ultimate Guide to 1-5/8 Inch Strut Channel

By David Davis
AD

When a project calls for 1 5/8 unistrut, the number is not a random measurement. It identifies one of the most widely used strut channel widths in electrical, mechanical, and industrial support systems. That 1-5/8-inch profile is the backbone of metal framing assemblies that carry conduit, pipe, cable tray, HVAC equipment, solar panels, and heavy machinery.

Understanding what 1 5/8 unistrut includes, how it is measured, and where it performs best helps you order the right material, avoid compatibility problems, and build supports that stay secure for decades. It also makes it easier to compare suppliers, select accessories, and plan installations that pass inspection.

What Is 1 5/8 Unistrut?

1 5/8 unistrut is a metal channel, typically cold-formed from steel, with an outside width of 1-5/8 inches. The return lips along the open side create a slot that accepts spring nuts, cone nuts, and other fittings. This design allows bolts and accessories to be positioned almost anywhere along the channel without drilling.

AD
1-5/8in Unistrut Metal Channel and Fittings
1-5/8in Unistrut Metal Channel and Fittings
1 5/8” Unistrut Channel and Fittings
1 5/8” Unistrut Channel and Fittings
an aluminum pipe with four holes on the side
an aluminum pipe with four holes on the side

Although Unistrut is a brand name, many people use it as shorthand for any 1-5/8-inch strut channel. The profile is standardized enough that most strut nuts, brackets, and clamps from major manufacturers fit together, but you should always confirm dimensions, gauge, and finishes before mixing brands on a critical job.

Understanding the 1-5/8-Inch Dimension

The 1-5/8-inch figure usually refers to the outside width of the channel, not the inside slot. The slot opening is commonly 13/16 inch or 7/8 inch, depending on material gauge and profile. That slot is wide enough for many threaded rods, bolts, and pipe clamps to pass through while still leaving room for the channel lips to support the load.

1-5/8 10 Wheel Heavy Duty Metal Frame Strut Channel Trolley -Uni/Super-Strut Made In USA
1-5/8 10 Wheel Heavy Duty Metal Frame Strut Channel Trolley -Uni/Super-Strut Made In USA
EZY Shelving Unistrut Hook™ Kit | 2 Hooks + 2 Turnbuckles | Unistrut Not Included
EZY Shelving Unistrut Hook™ Kit | 2 Hooks + 2 Turnbuckles | Unistrut Not Included
a metal door hinge with two holes on the front and one hole in the back
a metal door hinge with two holes on the front and one hole in the back

Depth is a separate specification. A standard 1-5/8-inch square strut may have a depth of 1-5/8 inches, while shallow or half-height strut can have a depth of 13/16 inch. Both may be called 1 5/8 unistrut because the width remains the same, so always check the full profile description before ordering.

Unistrut vs. Generic Strut Channel

Unistrut is the original brand associated with this channel shape, but today the market includes many equivalent products. The term 1 5/8 unistrut is often used generically, much like a brand name becomes a common label for an entire category. For structural or code-regulated work, brand equivalence matters less than meeting the specified material, gauge, finish, and load rating.

AD

Generic strut channel may be produced to different tolerances or from different steel grades. When mixing components, pay attention to hole patterns, slot width, and coating thickness. A 1-5/8-inch channel from one supplier may accept another supplier’s fittings, but that does not guarantee the same load capacity or corrosion performance.

Unistrut P1873-hg, Channel Flat Plate Fitting, Hot Dip Galvanized Steel, 1pc
Unistrut P1873-hg, Channel Flat Plate Fitting, Hot Dip Galvanized Steel, 1pc
EZY Shelving Unistrut Hook™ Kit | 8 Hooks + 8 Turnbuckles | Unistrut Not Included
EZY Shelving Unistrut Hook™ Kit | 8 Hooks + 8 Turnbuckles | Unistrut Not Included
an aluminum bracket with two holes on each side
an aluminum bracket with two holes on each side
8 Wheel HD Strut Channel Trolley V2 - Unistrut, Superstrut, Alumastrut
8 Wheel HD Strut Channel Trolley V2 - Unistrut, Superstrut, Alumastrut
16 Wheel HD Strut Channel Trolley V1 - Unistrut, Superstrut, Alumastrut
16 Wheel HD Strut Channel Trolley V1 - Unistrut, Superstrut, Alumastrut
1-5/8 Strut Channel Trolley - works with Unistrut, Superstrut P1000, P2949 V2 Made In USA
1-5/8 Strut Channel Trolley - works with Unistrut, Superstrut P1000, P2949 V2 Made In USA

Common Applications and Benefits

1 5/8 unistrut is popular because it solves support problems without welding or custom fabrication. It can be cut with a portable band saw or chop saw, assembled with hand tools, and adjusted on site. That flexibility reduces downtime and makes it easier to route conduit, pipe, and cable trays around existing structures.

The channel also provides a clean, repeatable framing system. Engineers can calculate loads using published span tables, and installers can follow familiar assembly methods. From small electrical racks to large mechanical supports, the 1-5/8-inch profile balances strength, weight, and accessory availability.

AD

Electrical and Mechanical Supports

Electricians use 1 5/8 unistrut for trapeze hangers, rack supports, seismic bracing, and equipment stands. The channel carries threaded rod, conduit clamps, and cable tray supports. Because the slot runs continuously, contractors can adjust spacing after the main structure is installed, which is valuable in crowded ceiling plenums.

Mechanical contractors rely on the same profile for pipe supports, vibration isolation bases, and HVAC curb adapters. With the right fittings, 1 5/8 unistrut can support chilled water lines, gas piping, ductwork, and rooftop units. The key is selecting the correct gauge and finish for the environment and load.

Solar, HVAC, and Industrial Framing

Solar installers often use 1-5/8-inch strut channel for roof mounting rails, panel supports, and ballasted racking. The channel’s corrosion-resistant finishes, such as hot-dip galvanized or aluminum, help it withstand weather exposure. Its modular nature allows crews to adapt arrays to roof obstructions and structural attachment points.

AD

In industrial settings, 1 5/8 unistrut frames control panels, guardrails, equipment skids, and storage racks. It is also common in data centers for cable runway supports and in factories for pneumatic line brackets. The system is not a replacement for engineered structural steel, but it is an excellent solution for secondary supports and modular framing.

How to Specify and Install 1 5/8 Unistrut

Specifying 1 5/8 unistrut starts with the application. Identify the load, span, environment, and code requirements. Then choose the material, gauge, hole pattern, and finish. A 12-gauge channel is common for general support, while 14-gauge may be suitable for lighter duty. Heavier gauges or double channels may be needed for long spans or dynamic loads.

Installation should follow manufacturer instructions and local codes. Use the correct strut nuts, washers, and fittings for the channel profile. Torque fasteners to the recommended values, and provide lateral bracing where required. If the support is exposed to moisture, chemicals, or outdoor weather, choose a finish that matches the expected service life.

Materials, Finishes, and Load Considerations

Most 1 5/8 unistrut is made from low-carbon steel, stainless steel, or aluminum. Steel channel is usually available in pre-galvanized, hot-dip galvanized, painted, or plain finish. Stainless steel offers superior corrosion resistance for food plants, wastewater treatment, and coastal projects, while aluminum reduces weight for solar and overhead installations.

Load capacity depends on span, support conditions, channel gauge, and how the load is applied. A single 1-5/8-inch channel spanning several feet behaves differently than a double channel or a trapeze assembly. Always use published load tables and apply safety factors. Do not assume that a longer span will perform the same as a short one, even if the channel looks rigid.

Accessories, Cutting, and Assembly

The accessory ecosystem is one of the biggest advantages of 1 5/8 unistrut. Spring nuts, cone nuts, square washers, beam clamps, pipe clamps, hinges, brackets, and end caps are all designed to fit the channel. These parts let you build supports that can be disassembled, adjusted, or expanded without damaging the framing.

Cutting is straightforward with a band saw, abrasive chop saw, or portable saw. Deburr the cut edges to protect hands and coatings. When assembling, place the strut nut inside the channel, align the fitting, and tighten the bolt so the nut engages the lips. For outdoor or wet locations, use stainless hardware or coated fasteners to prevent galvanic corrosion and premature failure.

Whether you are hanging conduit in a warehouse, mounting solar panels on a commercial roof, or building a maintenance platform, 1 5/8 unistrut gives you a proven starting point. Confirm the exact profile, gauge, and finish for your job, then pair it with compatible fittings and sound installation practices. That approach keeps your supports strong, serviceable, and ready for whatever the next project phase demands.

AD